
UNSOLVED
DC
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
0
43494
December 4th, 2006 14:00
The 590 SLI Chipset from NVIDIA's Perspective
DELL-Chris M (old account)
#IWork4Dell
Responses (46)
Solutions (0)
pointguard1122
1891 Posts
339
0
Posted December 4th, 2006 15:00
Thanks Chris. I will.pointguard1122
1891 Posts
339
0
Posted December 4th, 2006 15:00
The Dell 590 SLI Chipset from a consumer's perspective.When the XPS 700 was first announced adn it was advertised as leveraging the power og the 590 SLI chipset I was excited. I was going to get cutting edge technology in my new system. Then I clicked on the link and read all of the features of the Nvidia chipset. When people started actually getting their XPS700s (months later) we found that it was being reported as either 570SLI or Nforce 4 SLI. I got a little woried. Then we began to offical statements from Dell stating that most of the features were removed from the chipset in order to keep things standard accross all product lines. Of course this was understandable because the XPS 700 should have the same features as the bottom line dimension desktop. Next I try to do a little simple OCing with Ntune only to find out what a dog this chipset is for OCing. This really took the enthusiasm away from the C2D processor as it would not reach anywhere near its potential in this system. Next, some of our fellow members looked under the heatsinks to see a 570SLI and a Nforce 4 chipset. I still don't understand how you can take a one generation old chip and a 2 generation old chip, add one feature (2 16X PCIX lances) and call it cutting edge technology. Finally, my cutting edge 590SLI mobo died last night when trying to do the grueling task of opening itunes. Now I have a 80lb paper weight until late this week or next week.- It's pretty hard to see through all the smoke here, but it looks like the basic message is this:"Despite indications to the contrary, the XPS700 chipset is exactly as promised. Anyone who has an issue with that should take it up with Nvidia. Thank you for your interest in Dell. Goodbye."I think all the folks who've been rooting for the XPS700 thread to die out are about to get their wish. :smileysad:
tphillips63
4 Apprentice
•
2629 Posts
•
7922 Points
339
0
Posted December 4th, 2006 20:00
@Aivas47a wrote:
It's pretty hard to see through all the smoke here, but it looks like the basic message is this:"Despite indications to the contrary, the XPS700 chipset is exactly as promised. Anyone who has an issue with that should take it up with Nvidia. Thank you for your interest in Dell. Goodbye."I think all the folks who've been rooting for the XPS700 thread to die out are about to get their wish. :smileysad:
I think so for the most part but they still left out the OC capability, the dual ethernet, all the RAID options.
I beleive all but the Dual NIC can be done with BIOS upgrades. OC'ing with this board will probably be limited but if they open up two more bin increases on the x6800 that would get it up another 667MHz which is nothing to sneeze about, refine the BIOS for better ntune support for the other CPU's then it would go over much better since they did add VT support.
I would still like to be able to purchase a 680i board that I could plug into this case and call it a day (as long as its not a major gimped 680i!)
tphillips63 wrote:
I would still like to be able to purchase a 680i board that I could plug into this case and call it a day (as long as its not a major gimped 680i!)
I think you need to clarify what missing features would classify as "major gimped". I wouldn't get your hopes to high because I don't see Dell allowing the level of overclocking that aivas47a is getting or what Gateway is shipping from the factory (i.e. 4GHz on a 2.66 proc).Now if you're talking about that dual NIC, IP accel and all that fun stuff ... that's just silly based upon past explanations.
pointguard1122
1891 Posts
339
0
Posted December 4th, 2006 20:00
I think this is what we all want. I know I do.:smileyhappy:
tphillips63 wrote:
I would still like to be able to purchase a 680i board that I could plug into this case and call it a day (as long as its not a major gimped 680i!)
tphillips63
4 Apprentice
•
2629 Posts
•
7922 Points
339
0
Posted December 4th, 2006 21:00
@jsrder wrote:
I would still like to be able to purchase a 680i board that I could plug into this case and call it a day (as long as its not a major gimped 680i!)
I think you need to clarify what missing features would classify as "major gimped". I wouldn't get your hopes to high because I don't see Dell allowing the level of overclocking that aivas47a is getting or what Gateway is shipping from the factory (i.e. 4GHz on a 2.66 proc).Now if you're talking about that dual NIC, IP accel and all that fun stuff ... that's just silly based upon past explanations.
True and the NIC is pretty much what I meant as the only option to leave off so really there is no point in leaving it off either.
It would be dream land if they just made a 680i board that would fit the XPS 7xx case!mountainman611
161 Posts
295
0
Posted December 4th, 2006 22:00
It really doesn't matter what there explanations are.The facts are that they advertised a completely different rig than what they sold us.They are now trying to make a silk purse out of a sows ear.Their explanations so far just doesn't cut it.I, like many others here, want to know how we upgrade our"fully upgradeable" computer.Please answer that and Im sure you will have a few happy campers.

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
339
0
Posted December 4th, 2006 15:00
You should post your comments to the Nvidia spokesperson on Direct 2 Dell. I am sure they will be reading them.
DELL-Chris M (old account)
#IWork4Dell