
UNSOLVED
T
tattoojims
2 Posts
0
13523
April 24th, 2003 22:00
Running Slow
I recently bought a new Dell Dimension 4550. The computer has always processed information very slowly. In fact this computer is slower than the Pentium 3, 450, I replaced with this one. I have been on the phone with tech. numerous times and we have checked all the logical things including completely reformatting the whole computer, including the operating system. It still runs slow. I suppose tech. thinks I'm Nuts!! but I own four computers, one of which is another brand Pentium 4 and it runs circles around this Dell in the same enviornment. I have tried every type of diagnostic program I can find including Dell's and Norton; they come up with nothing. HELP!! If anyone has any ideas, I would appreciate some help.Thanks for your time!! Tattoo Jim
Responses (11)
Solutions (0)
tattoojims
2 Posts
758
0
Posted April 25th, 2003 01:00
Thanks a lot for your help. Tattoo JimI myself purchased a Dell 4550 2.66GHz 128Mb with ATI AIW Radeon 9000. Running XP. The system acted normally but after running an application, it will run annoyingly slow !! Worst than my 400MHz machine. It will not run Age of Mythology smoothly and will crash. Have tried updating and have ordered a 512MB memory to see if I am running short of memory which causes the slowness.
The machine is less than 1 week old, not loaded with any software except modem, ISP. If any of you faces the same problem and have resolved it, please help me out. Thanks in advance.
AnyNameGoesHere
6 Posts
758
0
Posted April 25th, 2003 18:00
I have had two 4550's.
The first one from last October ran lightening fast. Programs would "open" and "close" instantly.
This 4550 I got in February. Since day one it has "opened" and "closed" programs very slowly. It has the 2.66 MHz chip, and 1Gig Memory and 120HD. For example, anytime you open something new to the screen, it can take as long as a couple of minutes, at the worst of times. The other 4550, the programs would snap to the screen in a second.
Other then this painfully slow speed the computer seems just fine.
It acts as if the computer is pre-occupied with something, but I can't find out what it is?
Any Ideas?
autocadder
61 Posts
758
0
Posted April 25th, 2003 19:00
I was handed a 4550 at work (in lieu of the Precision Workstation I requested). It came with 128 megs of RAM. IMHO, and from my experience, 128 is NOT enough ram to properly run XP. I also noticed my 4550 was very slow when I first started it up. However, after upgrading to 1gb of RAM, I am happy to report that it is every bit as fast as I would expect it to be, and I'm running some fairly heavy CAD applications on it. I would run as a bare MINIMUM 256 megs of RAM for XP.AnyNameGoesHere
6 Posts
758
0
Posted April 25th, 2003 20:00
Observations: Well, I have downloaded and installed the MS update last week that is giving a lot of folks problems. The critical patch 811493. That patch has made my already slow 4550 even slower, simply not acceptable.
Then just a few minutes ago, I received a patch from McAfee. And things have gotten a lot faster. So, I decided to do a little experiment.
I turned off all the McAfee, and things got a good deal faster still! To about 60% to 70% to where they should be.
Another item I noticed, in reviewing the BIOs settings (F2 at bootup). There is a special setting on the hard disk (maybe on the IDE controller, close to the bottom of the BIOs settings screen), and this computer has come with the setting called "Bypass". And yet under the help key, it implies that "performance" is the way to go.
Does anyone know what would happen if that setting is set to "performance"?
I had the same problem. Did some research on the internet and found that the problem was a Microsoft patch that windows update had downloaded and installed for me. I am running XP Professional. The patch is called XP Hotfix (SP2)Q811493. I deleted this update from the add/remove program area in the control panal. As soon as I rebooted, my computer ran FAST. Here is the link where I found the information: http://www.windows-help.net/WindowsXP/kernel-patch-problems.html
Good luck!
this is my exact problem!!!!!! my 1ghz dimension 4100 blows away my new dell...its sad...i did 3dmark03 and got a 1600..when computers with my exact same setup were in the 5000's....dell tech is horrible...but these forums are great..... heres my setup in the link below..im gonna try the suggested fixes you guys posted...
For any of you that may have "Tweak UI" installed,,,,,,,,,,,,,,,
Since I got the Q811493 security patch the 16th, my page loading came almost to a stand still. After removeing the patch,,,, I did see some improvement.But I have been searching the web,,,, tying to find a IE browser 6 fix for slow page loading,,,,i have had,,,, for some time now.
After removing the Q811493 patch I was web searching again,,, slow page loading and finally ran across this odd simple fix under this Win's XP Tip link ,,,,,,, And it really brought back the IE browser 6.0 page loading speed I used to have.
Turns out that the slow down appearently started when i installed "Tweak UI" (Power toys),,,,, several months ago,,,,, in combination with linking to web site's thru Favorites.
If you have Tweak UI 1.3 installed and are having sloooooow page loading,,, linking thru Favorites you might try this. It sure worked for me. Scroll down to: "Speed up Internet Explorer 6 Favorites".Dell Dimension 4100 (incase upgrade) Intel(R) 2.4(oc 2.8) specs
Message Edited by rustymt on 04-26-2003 04:35 AM

SSGTZ
50 Posts
758
0
Posted April 24th, 2003 22:00
Your on the right track with the things you've done, but you should do a search for previous posts involving slow performance. Many times it's a software/hardware/driver conflict that many diagnostic programs won't detect.
I've seen a lot of helpful posts on this issue. Provide the details of your system hardware and software, and we'll be able to help.
I had a satellite modem software issue that dogged my 8250 for some time. It wasn't until I got an upgraded version of it that my system started moving the way it should.
- XP has a bad patch out there that affects some people, you may want to look at that.
- Make sure your hard drive is showing up as DMA5 too.
- Look in your Device Manager for any flags indicating trouble.
- Look in Task Manager for any programs using too many CPU cycles (disregard the system idle at the bottom)
- If you have anything attached via USB check the performance with the device removed.
- Upgrade any drivers for your hardware that you can. Visit the manufacturer sites.
- If your running XP install bootvis.exe It's from Microsoft and it really helps with boot up and shut down
http://www.microsoft.com/hwdev/platform/performance/fastboot/BootVis.asp
There's a multitude of things that may help, but a search on this forum will probably be the quickest way for you. You should be able to figure this out eventually.