
UNSOLVED
Precision T7500 Memory Upgrade
I'm planning to upgrade Precision T7500 (dual Six Core Processor, X5660) memory to 60Gb with following configuration:
4 - 4 - 4 / 8 - 8 - 8 - 8 - 8 - 8
3 x 4Gb Crucial DDR3 1333 PC3-10600 Dual Rank Registered ECC Sticks (http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=595AED64A5CA7304)
6 x 8GB Crucial DDR3 1333 PC3-10600 Dual Rank Registered ECC Sticks (http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=F45BC5B8A5CA7304)
Should I have any issues?
Also may decide to increase to add further 12Gb in 4Gb sticks to populate all the slots (4 - 4 - 4 - 4 - 4 - 4 / 8 - 8 - 8 - 8 - 8 - 8) - this configuration ok?
Thanks much in advance for any advice!
Responses (5)
Solutions (0)
The T7500 manual
<ADMIN NOTE: Broken link has been removed from this post by Dell>
says:
Max Memory: 96 GB; 192 GB with optional riser
Module capacities: 1 GB, 2 GB, 4 GB, 8 GB and 16 GB
DDR3 1066 MHz SDRAM
DDR3 1333 MHz SDRAM
(DDR3 800 MHz capable)
bloodsmear
14 Posts
7077
0
Posted May 4th, 2015 12:00
Just a quick question. My system has 1 2gb ram chip. Can i add an 8 gb chip and keep the 2 gb chip. Or does the ram need to be matched?

osprey4
6 Operator
•
34230 Posts
7077
0
Posted November 7th, 2011 16:00
Hi Expat1966,
The Crucial site seems to allow for this, so I don't see why not. But let me see if one of my buddies will chime in on the question.