
UNSOLVED
possible power issues with 9800 pro on a dim8200.
This Dimension was bought about two years ago. Now, I've heard a lot of people here say that the supposedly 250W PSUs are able to go almost 100 watts more, but I doubt my comp has one. I got the Ati's 9800 pro today, and I'm having severe issues with it after swapping my old gf3 that came with the dell. Here's the deal. After playing a 3d game for a few minutes, it would crash. or even bluescreen an otherwise stable system. After checking the win2k event log, it was filled with hundreds of messages like:
-----------------------------------------------------------------
Event Type: Information
Event Source: dmio
Event Category: None
Event ID: 29
Date: 12/12/2003
Time: 10:09:42 PM
User: N/A
Computer: DELL
Description:
dmio: Harddisk0 read error at block 34118810: status 0xc000009a
Data:
0000: 00 00 00 00 04 00 4a 00 ......J.
0008: 00 00 00 00 1d 00 05 40 .......@
0010: 00 00 00 00 00 00 00 00 ........
0018: 01 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
-----------------------------------------------------------------
Rebooting clears up the read problems. The harddrive is NOT the problem since it worked fine up until the 9800 was put in.
I suspect it's the Dell's PoS PSU that is stretched to the limit. Are my suspicions correct? It is also my understanding that Dell uses non-standard connectors to prevent upgrades. Is that true? I've read somewhere that it's still possible to connect a standard ATX power supply. Is my only option to buy a horrendously overpriced 150$+ dell-compatible from http://www.pcpowercooling.com/? The card was already expensive enough.
Also, isn't that some boneheaded engineering on ATI's part not to provide an external AC adapter for those of us without high-power PSUs?
-----------------------------------------------------------------
Event Type: Information
Event Source: dmio
Event Category: None
Event ID: 29
Date: 12/12/2003
Time: 10:09:42 PM
User: N/A
Computer: DELL
Description:
dmio: Harddisk0 read error at block 34118810: status 0xc000009a
Data:
0000: 00 00 00 00 04 00 4a 00 ......J.
0008: 00 00 00 00 1d 00 05 40 .......@
0010: 00 00 00 00 00 00 00 00 ........
0018: 01 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
-----------------------------------------------------------------
Rebooting clears up the read problems. The harddrive is NOT the problem since it worked fine up until the 9800 was put in.
I suspect it's the Dell's PoS PSU that is stretched to the limit. Are my suspicions correct? It is also my understanding that Dell uses non-standard connectors to prevent upgrades. Is that true? I've read somewhere that it's still possible to connect a standard ATX power supply. Is my only option to buy a horrendously overpriced 150$+ dell-compatible from http://www.pcpowercooling.com/? The card was already expensive enough.
Also, isn't that some boneheaded engineering on ATI's part not to provide an external AC adapter for those of us without high-power PSUs?
Message Edited by data_dud on 12-13-2003 12:52 AM
Responses (8)
Solutions (0)
Greatone1601
2 Intern
•
907 Posts
489
0
Posted December 13th, 2003 14:00
so its NOT the power supply?Greatone1601
2 Intern
•
907 Posts
489
0
Posted December 13th, 2003 14:00
I kid you not, I was about to hit the order button for a 9800 pro today for my 8200. My fear is ordering it online and finding out it DOESNT work because of the power supply. Man this is not cool!
2FAST FERU
13 Posts
489
0
Posted December 13th, 2003 14:00
I had similar troubles also with ati.Very important run driver cleaner.Uninstall nvidia drivers,boot into safe mode(tap f8 0n reboot)run driver cleaner in safe mode,then install ati drivers in safe mode and reboot.Should do it for ya.- Yes, perhaps I was a bit rash with my assessment. After I tried to install another fresh copy of win2k to test whether it's a hardware problem, an attempt to format a new partition ended in a blue screen and, apparently, the loss of the whole partition table :( :( :( (win2k setup sees the entire 80gig drive as "unallocated space"). Obviously, something went very wrong. Now, I'm picking up the pieces of my data. However, I think it was some software problem that surfaced after the driver switch. My current HD is too small to install a few graphical games, but I tried a couple of things and they didn't seem to cause reams of log entries.
Anyway, I'll post an update once I'm done sorting the royal mess I got myself into and once I'm able to use 80 gig drive again. Greatone1601
2 Intern
•
907 Posts
489
0
Posted December 13th, 2003 23:00
If I order a 9800 Pro or 9800 XT and it DOESNT work because of the Dell power supply I'm going to be VERY unhappy. Then I'll end up shelling out 140 bucks for a new powersupply. man that would be annoying,2FAST FERU
13 Posts
489
0
Posted December 14th, 2003 17:00
O.K guys i just went yesterday and bought the 9800XT and it runs flawless.Ive always been an Nvidia guy but this card is amazing.6Xs AA and 16Xs AF on all my games and runs perfect.It crashed once on me playing Call of Duty but i guess there were issues with that game and ATI so i installed the patch from ATI and all is good now.I have a P4 2.53Ghz Dell Dimension 4500,1024 Megs of Ram,9800XT,and Sound Blaster Audigy Gamer running windows XP.PS is also one of those rated at 250 Watts.You will love the card.If you have any troubles at all reformatt and youll be good to go.I just ran driver cleaner and that seem to work fine for me.

Ron B
639 Posts
489
0
Posted December 13th, 2003 14:00