UNSOLVED

phineas.freak

updated

19 years ago

0

33874

March 26th, 2008 11:00

OPTIPLEX GX620 stuck during boot

My OPTIPLEX GX620 frequently hangs during boot with the diagnostic lights 1 and 4 on. This combination is not listed in the manual. The keyboard does not repond in this phase. Only cold start with power button helps. Sometimes the machine must be rebooted several times. After successful boot no problems visible.

 

Only printer (parallel) and USB devices are connected, only one original memory module (1GB) is in slot 1, no PCI cards. Built in video (VGA connector) is used.

 

Any suggestions appreciated. 

  • smoothmove

    1 Rookie

    •

    63 Posts

    545

    0

    Posted March 27th, 2008 11:00

    When you try to power it up and it fails,  Do the fans spin up on high or low?

     

      Also, have you tried the dell diagnositc disk on bootup?

     

      Just an idea.

  • smoothmove

    1 Rookie

    •

    63 Posts

    545

    0

    Posted March 28th, 2008 18:00

    Usually when the fan spins up on high with no post,  it means that there is something wrong with the cpu.  Try a different CPU  or  if you recently replaced the cpu, try reseating it. 

     

      

  • LE_PISD

    3 Posts

    545

    0

    Posted March 28th, 2008 18:00

    I have this issue as well.  Have tried the Dell diags - nothing comes up as bad.  The fan usually spins in high-speed -- but I haven't seen anything about what that could indicate, so if you have some information, I'm all ears.  Have replaced the power supply in one or two, and the mother board in one or two (lab in a high school).  The issue has been wide-spread in this lab though.

     

    Optiplex 620 minitower, model # 0HH807, BIOS A07, Win XP SP2, 1Gb RAM, Intel P4, integrated graphics & audio.