Mike6802

updated

15 years ago

M

Mike6802

1 Rookie

•

28 Posts

0

82579

April 20th, 2012 10:00

OptiPlex 580 - quits working and I don't know why

I work a support desk; lot's of Dell 580's.  Had one yesterday that I can't figure out.   (BIOS version A04).  The screen goes black intermittently, and there's no blinking HDD light on the frnt - just a steady green "on" light.  I've reseated the HDD cables, run the bootable Dell Diagnostic 32-bit ISO, checked the BIOS System log, and the Windwos XP System and Application logs - nothing.  It just quits on its own and you ahve to do a hard shut-down.  I can't keep it running.

My supervisor advised me to wipe the disk and try the tests again. Same results.  For kicks I put in a new HDD - same results.  Can't run complete diagnostics as it keeps 'freezing' on me.  I checked the indicator lights in front and find that numbers 1 through 4 light up during the diagnostics, and stay light when it 'freezes'.  No HDD blinking light.

It's still under warranty, but it'd be nice to narrow things down before I call for support.  Any ideas?

  • Mike6802

    1 Rookie

    •

    28 Posts

    1192

    1

    Posted April 24th, 2012 15:00

    Dell Tech Support was helpful.  After I related all I've posted here, they suggested - as a way to 'check all the boxes' - that I swap out the video card.  I did so and .... the darn thing works.  I've had it up for ~ 36 hrs, even installed WinXP (bare-bones); not a single problem.

    Don't know why, but it worked.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    933

    0

    Posted April 20th, 2012 11:00

    Did you try clearing BIOS?

    Power off and unplug

    Press/hold power button for ~15 sec

    Open case and remove motherboard battery

    Press/hold the power button again for ~30 sec

    Reinstall the battery (right-side-up!)

    That will reset BIOS to factory defaults so you may need to change some settings back to the correct settings for the installed hardware afterwards, assuming you get it to boot after clearing BIOS.

  • e.r.a.

    63 Posts

    933

    0

    Posted April 20th, 2012 11:00

     

     

    I would be suspicious of the monitor.  Are you sure that it is working correctly?  Do you have another known good monitor that you can try with this system.  And does this Optiplex 580 have integrated or dedicated video?

  • speedstep

    11 Legend

    •

    46969 Posts

    933

    0

    Posted April 20th, 2012 11:00

    Boot from a Live Linux DVD or USB Flash drive.

    Remove the hard drive.

    Does it still freeze?

    Booting from Flash

    In order to create a bootable USB-medium (memory flashdisk, SD-card, digital camera with USB connector, cellphone with microSD, ...), the program flash-knoppix can be started from a running Knoppix system. This program installs all needed Knoppix files onto the FAT-formatted flashdisk, and creates a boot record for it. If desired, the target medium can be partitioned and fornatted, or left in its inistal state, so that existing files stay intact.

    KNOPPIX 7.0 / ADRIANE 1.4 - Live CD / DVD

    linuxpromagazine.com » Issues » 2012 » 137 

    Issue #137 / Apr 2012

    Cover Theme: Security

    DVD: Knoppix 7.0



    SERVICE April 2012: DVD Inlay
    Issue #137
    This month’s Linux Magazine DVD is the brand new Knoppix 7.0 Live distro in 32- and 64-bit options....

  • Mike6802

    1 Rookie

    •

    28 Posts

    933

    0

    Posted April 20th, 2012 12:00

    e.r.a.

    I've used several monitors - no change in behavior.

  • speedstep

    11 Legend

    •

    46969 Posts

    645

    0

    Posted April 20th, 2012 13:00

    If it did this with linux DVD I would think ram or CPU overheating.

  • Mike6802

    1 Rookie

    •

    28 Posts

    933

    0

    Posted April 20th, 2012 13:00

    RoHe,

    Good idea.  I'll give it a try once I let the Linux CD go for awhile.  I'll report back.

  • Mike6802

    1 Rookie

    •

    28 Posts

    933

    0

    Posted April 20th, 2012 13:00

    Speedstep,

    I booted into a Linux CD a few minutes ago and then disconnected the hard-drive.  I'll let it go for a bit and report the results.

  • Mike6802

    1 Rookie

    •

    28 Posts

    645

    0

    Posted April 20th, 2012 13:00

    I kinda thought so, too.  But when I was able to run Dell Diagnostics, the memory and CPU tests all passed.  Maybe it's not being reported accurately by the test app.

  • kaiwei

    1 Message

    933

    0

    Posted April 20th, 2012 13:00

    Never say never, there is always something to try.

    http://www.nlmlol.info/g.gif