
UNSOLVED
P
Peanut0711
2 Intern
•
136 Posts
0
18391
April 9th, 2008 13:00
OCZ gold ram upgrade - will this work in my 630?
I ordered 3Gb of ram @800mhz on my 630 which I got last wekk. However, it is annoying that it is only reporting 4.8 in the WIndows Experience Index. I have been looking to upgrade to 'better' ram such as Corsair and then I came across this today:
http://www.overclockers.co.uk/showproduct.php?prodid=MY-086-OC
I know Vista 32bit won't recognise all 4gigs but for the money, it seems a bargain. What do you think - will I see a difference in performance or is it an unnecessary indulgence? Thanks.
Responses (10)
Solutions (0)
Peanut0711
2 Intern
•
136 Posts
292
0
Posted April 9th, 2008 19:00
That is the current set up I have for 3gigs - two matched sets of ram. However, I was thinking of replacing all of that with the OCZ stuff (or similar with 2x2Gb sticks). Do you reckon changing to well regarded brands will make much of a difference?Unless you are planning on upgrading to Vista x64, I would say this is an indulgance. Both the OCZ and no-name brand will run at 800mhz. I personally wouldn't purchase the four gigs just to imrpove the Windows Index score. I don't believe you will see any noticeable performance gains.
Name brand RAM however, is usually backed by a good warranty and many claim it will perform better than generic RAM with the same specs. If you don't trust that your generic RAM is performing as it should, I say go ahead and do it. It is a good deal for four gigs.
Message Edited by LupercalH on 04-09-2008 04:06 PMRambler358
526 Posts
292
0
Posted April 9th, 2008 21:00
Seems like a good deal. However, if you're planning on doing any OC at all I'd recommend going with 2x2GB modules at 1066MHz. DDR2 RAM is getting quite cheap now, and for not too much more you'll get better speed with the 1066MHz sticks. Also, using only 2 of the RAM slots will not put as much of a strain on the memory controller if you plan on any overclocking.Peanut0711
2 Intern
•
136 Posts
292
0
Posted April 9th, 2008 22:00
I only have my system a week and its running really smooth at stock speeds. I know nothing about OCing yet although I would be interested in ocing the cpu as it almost seems built for it. I got the impression from reading various tech sites that I might be better off with some reputable branded stuff rather than generic. I will maybe hold on until I need to change. No intentions of going Vista 64 just yet either. Thanks anyway.big THX for the fast reply :-)
so i will try tonight a reinstall with x64.......
I already checked Adobes webside but didnt find a trustfull answer.... means its a OEM Version and they cant give me support..... or tipps. however i will check this and post it to the board so maybe other will find it helpfull.
cu
dschieses
I have loaded Crysis and gave it a quick test up through the first section with no issues..ran smooth and definatly saw the graphic difference between DX9 and X10
HL2 an HL2 Episode one..run very wlll
Doom3 runs all on high
Quake4 same
F.E.A.R (S) all run well
I think you may have an issue with you Adobe software best thing would be to check their web site..

Davet50
6 Operator
•
14442 Posts
292
0
Posted April 9th, 2008 16:00
did you order the ram to fill all the slots? for 3 gig you should have 2 1 gigs and 2 512meg
Ram should be installed in pairs for the best performance..
I would look for OCZ ram that is EPP/SLI enabled for the best performance