
UNSOLVED
D
DiggerMeUp
10 Posts
0
8281
December 2nd, 2012 00:00
msata 32gb cache and esata and disk controller configuration xps8500
I have a question about mSATA and eSATA requiring mutually exclusive disk configuration, where an xps 8500 uses the 32gb mSATA ssd as a cache and if this has an impact on esata and hot plugging. I have just ordered a dell with this setup and am thinking of cancelling my order.
I use external drives connected via esata and use these in hot pluggable mode on my old pc and laptop. Neither these systems needed any bios changes they just work (i think because they each have a simple internal disk drive and no raid or anything).
I have read that on some systems for eSATA hot plugging to work the disk controller needs to be set to AHCI otherwise you get the dreaded blue screen of death BSOD.
The XPS8500 when using the mSATA as a cache uses Intel Smart Response Technology(SRT) which according to wiki "is available only when the integrated disk controller is configured in RAID mode (but not AHCI or IDE modes) by implementing a type of RAID striping".
Point being this excludes AHCI or IDE which seems to rule out esata hot plugging and may not allow esata at all.
Don't know if it is relevant if esata is done via PCIe card or via a back plate. (Currently use a PCIe card with port multiplier)
So my question is do mSATA cache setups like this exlude esata hot plugging or prevent esata from working altogether?
thanks in anticipation
Responses (1)
Solutions (0)

DiggerMeUp
10 Posts
123
0
Posted December 2nd, 2012 05:00
Just done some more digging on this:
Looks as if some motherboards allow you to set things like AHCI for all ports whereas others allow you to set them port by port.
Presumably the mSata mini port and Sata 0 would need to show up separately in the bios from any other esata controllers whether via PCIe card or plugged directly into one of the other SATA ports on the motherboad.
Can anyone verify please this?
thanks