
UNSOLVED
Installed 720 UPGRADE kit and VISTA x64
Upgrade went great. Very simple and straight forward, about 2 hours from start to boot.
Tip: to run your flat cable from the motherboard to the front IO connector, remove the 4 screws from your power supply so you can slide it around. I slipped the cable in from outside under the ps and got it arranged quite nicely.
Anybody else install Vista x64, and if so, how did you make out?
Only issues I have, and I share with tphillips, are the nvidia monitor won't run.....
My X6800 is humming along @ 3.7Ghz right now
Good luck guys, it's a nice upgrade!!!
some pics posted here:
http://www.pbase.com/champ3jd/xps_720&page=all
Message Edited by gdwrnch3 on 08-26-2007 06:17 PM
Responses (22)
Solutions (0)
chuckburmester
26 Posts
1079
0
Posted August 27th, 2007 09:00
AWSOME! Thank you, your pictures answered some of the questions I had as tp bios options and light fx. My motherboard will be here today and the tech called last week and gave me his cell # and said call him when it arrives, can't wait.Thank You,Chuck
gdwrnch3 wrote:
Upgrade went great. Very simple and straight forward, about 2 hours from start to boot.Tip: to run your flat cable from the motherboard to the front IO connector, remove the 4 screws from your power supply so you can slide it around. I slipped the cable in from outside under the ps and got it arranged quite nicely.Anybody else install Vista x64, and if so, how did you make out?Only issues I have, and I share with tphillips, are the nvidia monitor won't run.....My X6800 is humming along @ 3.7Ghz right nowGood luck guys, it's a nice upgrade!!!some pics posted here: http://www.pbase.com/champ3jd/xps_720&page=all
Message Edited by gdwrnch3 on 08-26-2007 06:17 PM
great pics, however I am still waiting for mine still waiting for a call from Dell which they where surposed to call me back the other day and I AM STILL WAITING!its coming to the point where I am promised all these things and I am getting broken promises, I am starting to loose faith in it all.
- I finally got my 720 Mobo upgrade kit this weekend and it took me approximately 2 hours from start to finish. I took longer than usual, because I wanted to clean in the inside of the case and make sure that the job wasn't rushed. I also purchased the Windows Vista Ultimate edition for this upgrade and couldn't figure out if I wanted to install the x32 or x64 OS. I eventually decided on installing the x32 OS. What are the pros and cons of going x32 vs x64? Is there a huge benefit to performance? Also, I installed Bioshock right after the installation to see how my first DX10. I would have to say..... I'm addicted.... the game rocks.
gdwrnch3 wrote:
Upgrade went great. Very simple and straight forward, about 2 hours from start to boot.Tip: to run your flat cable from the motherboard to the front IO connector, remove the 4 screws from your power supply so you can slide it around. I slipped the cable in from outside under the ps and got it arranged quite nicely.Anybody else install Vista x64, and if so, how did you make out?Only issues I have, and I share with tphillips, are the nvidia monitor won't run.....My X6800 is humming along @ 3.7Ghz right nowGood luck guys, it's a nice upgrade!!!some pics posted here: http://www.pbase.com/champ3jd/xps_720&page=all
Message Edited by gdwrnch3 on 08-26-2007 06:17 PM
I am having my hardware upgraded this thursday, at last! :)however have you had any issues with activating windows vista again? after a clean reinstall? I have vista and hoping that it will activiate without any problems.
gbw1229 wrote:
Being able to run in SLi with my dual GeForce 7900GTX cards and being able to run the sound blaster X-Fi sound card without the squeal of death. I know this was an issue with the sound card and video cards when Vista first came out. I have downloaded all drivers to include the Dell drivers onto a DVD disc.
gbw,Although I didn't upgrade, I did have this problem also. I moved the sound card to a different PCI slot so that it wouldn't share the same IRQ with the video cards. This may or may not work for you but so far it has for me.Good luck!
gdwrnch3 wrote:
chama98,No issues at all activating. If you have Dell disk, there definitly won't be any issues
well I have the dell XPS xp windows disc which camew witht he system and the vista disk which I bought from a retail outlet, so do you think I should pop XP on first and then install vista on top of that?- If you haven't had Vista installed yet, you will definitly have no problem activating.I had Vista x32 on a 2 disk raid array. What I did was, installed the kit, booted to the mfg screen, let it go through it's deal, around 2 minutes. Then reboot, into the bios setup screen, and set my new boards bios up exactly as the old one, save and exit, and the system booted to my "old" raid array. I wanted to use x64, but I did try this for the guys that are upgrading, and had been asking the question. Yes, the new board will recognise your old os if you set the bios correctly.I then upgraded to Dell's A02 bios on the 720 page. Then I broke the array, assembled a new one, popped in my Vista x64 disk, formatted the disk, and installed Vista Ultimate x64, activated windows, and everything is now running like a clock.The only tiny issue I am having is that the nvidia ntune monitor isn't working with x64, very strange indeed, because it works in my other 700 with Vista x64????Be sure if you have SLI/EPP memory installed, you set your bios up as such, and after you install ntune, enable it in your bios, open it, agree to the terms, go to the performance tab and select "dynamic bios acess", and make sure the "HT LINK FREQUENCY" is set at 1000MHz., if it isn't, you will need to set it to that, and then clear your cmos settings. I also disabled all my "spread spectrum" settings.Here's a clip:I will be on most of the time the rest of the week, and all weekend so if any help is needed, please look me up.This upgrade is fantastic, You will really like it.have a good day,jd
Message Edited by gdwrnch3 on 08-29-2007 07:03 AM
gdwrnch3 wrote:
If you haven't had Vista installed yet, you will definitly have no problem activating.I had Vista x32 on a 2 disk raid array. What I did was, installed the kit, booted to the mfg screen, let it go through it's deal, around 2 minutes. Then reboot, into the bios setup screen, and set my new boards bios up exactly as the old one, save and exit, and the system booted to my "old" raid array. I wanted to use x64, but I did try this for the guys that are upgrading, and had been asking the question. Yes, the new board will recognise your old os if you set the bios correctly.I then upgraded to Dell's A02 bios on the 720 page. Then I broke the array, assembled a new one, popped in my Vista x64 disk, formatted the disk, and installed Vista Ultimate x64, activated windows, and everything is now running like a clock.The only tiny issue I am having is that the nvidia ntune monitor isn't working with x64, very strange indeed, because it works in my other 700 with Vista x64????Be sure if you have SLI/EPP memory installed, you set your bios up as such, and after you install ntune, enable it in your bios, open it, agree to the terms, go to the performance tab and select "dynamic bios acess", and make sure the "HT LINK FREQUENCY" is set at 1000MHz., if it isn't, you will need to set it to that, and then clear your cmos settings. I also disabled all my "spread spectrum" settings.Here's a clip:I will be on most of the time the rest of the week, and all weekend so if any help is needed, please look me up.This upgrade is fantastic, You will really like it.have a good day,jd
Message Edited by gdwrnch3 on 08-29-2007 07:03 AM
Thanks for that,I am in the middle of backing things up, the BIOS I have not touched as in configure it at all, it is all the factory settings so I know that is not an issuse, however I have pulled out my RAID drivers, but they are for the xps 700 RAID, so I am not sure wether they will work for the 720. I must admit I am looking foward to it, all, The Dell techy here in the UK said that it will come preinstalled with the latest BIOS A02 I believe,Just one question do you get a new service tag with the new board? I guess it will be easy to get drivers though.,

gbw1229
95 Posts
1079
0
Posted August 26th, 2007 23:00