
Solved!
Go to SolutionInstallation of Noctua NH-U9B SE2 CPU cooler for XPS8300
Hello: I am XPS8300 user from Hong Kong, Anyone tell me that is the Noctua NH-U9B SE2 CPU cooler install to XPS8300 i7 2600? Thks. http://www.noctua.at/main.php?show=productview&products_id=31&lng=en&set=1
Responses (8)
Solutions (0)
The Dell proprietary CPU cooling fan has addtional electronic components on it and it "reports" to the BIOS. It's not a simple matter of a connector adapter.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio applicationIn the past you would get a fan error if you try to replace the Dell cpu fan with an aftermarket cooler. The Dell fans use to have a temp sensor built in on the older models like the Dimension-3000's that caused this.You can buy coolers that have a 4-pin fan like some of the Zalmans models that you can power off the motherboard on the newer Dells though.If you want to use the Noctua that has 3-pin fans this is how i would hook it up i would power the two Noctua fans straight from the power supply using a power adapter and remove the Dell fan from the heatsink and move it to the front of the case and keep it powered off the motherboard you can buy an extension adapter to relocate the fan.
I use Zalman ZM-MC1 Multi-connector to power the fans off the power supply but if you still have the Dell power supply it probably want have molex only SATA.
Here is what the extension looks like to relocate your Dell fan.

fx4baja
119 Posts
2950
1
Posted June 22nd, 2011 19:00
It will fit in the case but the Noctua fans are 3 pin the Dell uses 4 pin for motherboard fan control.You can power the Noctua fans off the power supply using either a fan controller are wiring adaptor and keep the Dell fan hooked to the motherboard used as an extra case fan.