UNSOLVED

coca78

updated

20 years ago

C

coca78

8 Posts

0

1602

October 25th, 2006 02:00

I want to install ATI RADEON® X600 256MB HYPERMEMORY

I want to install ATI RADEON® X600 256MB HYPERMEMORY, I need any idea about it, I have XPS 400, I want to edit video and I need to know if it works good, thank you for any idea, I'm sorry but I can't write much english
  • SR45

    2 Intern

    •

    12138 Posts

    297

    0

    Posted October 25th, 2006 10:00

    That card is low end, but it will work.  You might want to consider a better video card, lets say a pci-express 7600 GS or the better 7600 GT card, that is mid level, but much better than the low end X600 pci-express card.  You should have lots of memory as well, that will help in many applications.  1 GB is good, but 2 GB will be better, if you don't have it now..  If you are going from a nVidia video card to a ATI card, read the below suggestions in installing the new card.

     
    Step One....

    Download the most current driver for the video card, and have it placed on the desktop for later install. Try not to use the video card driver from the cd that comes with the card, since they are some what out of date. ( If it’s a nVidia card, go to www.nvidia.com . If it’s an ATI card, than go to www.ati.com  for the driver download.

    Going from an ATI card to NVIDIA or vs. versa, one should uninstall the old driver first. Before installing a new driver, make sure you uninstall all nVidia or ATI display drivers from the Windows Control Panel. Browse to the Start Menu > Windows Control Panel > Add/Remove Programs, and search for nVidia or ATI Windows Display Drivers or called nVidia Display Drivers, than select remove. Than use the driver cleaner, to get all the old driver code completely off the system. Use the driver cleaner twice. If you are going from a nVidia card to another nVidia card ( Same for the ATI card ), you may not have to use the driver cleaner, but I do to be on the safe side, but many, including myself, have not seen any issues with this procedure. Others may have.


    http://www.drivercleaner.net/  Driver Cleaner Pro download site.

    1. Turn off the system, unplug the power cord, and push in on the systems power button for about 5 seconds to discharge the system further.

    2. Remove the old card, and install the new card, firmly. Attach, if required, any power cable to the card, and to a power connector on your system. ( Some video cards, but not all, may need either a power connector or Molex Y power cable connected to the rear of the video card, and the other end to a power connector, to get the video card to work.  The X600 does not need this extra power connector )

    3. Plug the power cable back in, and reboot the system. You may notice that the monitor screen is larger now. Not to worry if this happens, since you are now using Microsoft’s Generic video driver, prior to installing the one you downloaded.

    4. Now disable your anti virus software, and disconnect the modem at this time..

    5. Install the newer video card driver from the desktop, than if necessary, go into the Display Properties to reset the monitor resolution after it reboots. You are almost done. Now restart the anti virus program, and connect the modem. ( It has been noted from time to time, that the anti virus program may cause problems with the install of some drivers, and some games, so it’s best to disable this during the driver install to eliminate that possibility )

    Display Properties.... Right click your mouse on an empty part of the monitor ( desktop ), click on Properties next, than click on Settings on top. Now look at the screen resolution bar on the left side. Move it to the proper resolution to the monitor you have. Click on Apply, than OK. The monitor will go blank for a second of two, than another box will appear in the upper left side asking you if you wish to keep the new settings. Click OK. Do so before the second counter goes down, and you have to start over.... Now you are done

    http://www.gpureview.com/show_cards.php?card1=437&card2=370   Video card comparison guide.

    Proper install of a video card link found here: http://www.hardforum.com/showthread.php?t=965852
     
    Hope this helps a little.   Let us know if you need additional assistance.  Good luck  :smileywink:
  • BigCTM

    29 Posts

    297

    0

    Posted October 26th, 2006 01:00

    I am installing a Connect3D X800GTO to replace my 7300LE on a XPS 410. I have a quick question on installing power to the 6 pin connector on the card. Unfortunatley, the power supply does not have a PCI Express power connector.

    The card came with an adapter with 3 ends. One end obviously plugs into the 6 pin connector on the card. The other end I plugged into a regular molex connector on the power supply. The other end looks like a hard drive connector maybe (not sure but it's definitely not a regular molex connector). Do I need to do anything with this end? It seems to be working the way I have it but was wondering if I might have missed something since one end of the adapter is not being used. Thanks for helping out.
  • BigCTM

    29 Posts

    297

    0

    Posted October 26th, 2006 01:00

    Thanks for the tip! I opened the case back up and found the 6 pin connector. Simple. Don't have to worry about an adapter now...
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    297

    0

    Posted October 26th, 2006 01:00

    It does too have the connector you just need to look around more until you find it.