UNSOLVED

str8flexed

updated

22 years ago

0

12012

December 24th, 2004 08:00

I think I need a new motherboard?

Hi guys, I'm new to this forum. Anyway, my computer is 1 year old, and it's a Gx270 3.0ghz, 1 gig of ram, more details if needed. This summer it started acting up and now I get a lot of page_fault_in_nonpaged_are, irq_not_less_or_equal, win32k.sys, and stop 0x00000008E messages.

I've run MemTest86+, the Windows Memory diagnostic, Hot CPU Tester Pro, Prime95, Chkdsk, Scandisk, the Seagate Hard Drive utility, the Dell Utility CD full diagnostic check program, and some other tests, each several times. My computer passed each and every memory test, L2 Cache test, hard drive test, whatever. I've tried switching video cards and ram sticks with a friend but still got crashed--I've tried using my friend's PC power and cooling (Dell compatible) power supply, with no luck--and I've just several days ago pulled everything except for my video card and bay drives, did a full format of my hard drive from scratch, and installed Windows XP. Within hours I was getting this crash again. I have updated the chipset drivers, bios, and everything else I can find on the Dell downloads page.

Is it possible that this is a motherboard issue and I'd need a replacement? Any insight would be helpful. And yes, I'm still under warranty but just haven't had the urge/time to call in and ask for help. I did once a while back but didn't get anything solved.
  • 5JM

    6 Posts

    605

    0

    Posted December 24th, 2004 16:00

    Hi

    I may have found a possible solution, and with try and translate it from Microsoft speak! :smileyvery-happy:

    According to Microsoft, your problem is caused, on rare occasions, when you use the keyboard to navigate menus. They say that most programs are fine but one or two causes this type of error / BSOD.  They also acknowledge that this is a known issue with Windows XP and the solution is to install XP then SP1 or 1a then install the patch or install SP2, becasue they say the problem has been fixed in SP2.

    If you want to have a look for yourself, search the microsoft site for Article 834450 or click this link --> http://support.microsoft.com/default.aspx?scid=kb;en-us;834450

    Hope this helps !

    Stephen :smileyvery-happy:

  • 605

    0

    Posted December 24th, 2004 22:00

    Wow, thanks for the quick reply.  That problem sounds interesting.  However, you mentioned that it's fixed in the later service packs.  I ran Windows Update and updated everything after my format, including Service Pack 2, so I suppose it should have fixed it.  The crashes also occur at random times, sometimes when I'm not even at the computer, so it's probably not that.  I suppose sometime after Christmas I'll just call Dell again and hopefully get a replacement motherboard.
  • 5JM

    6 Posts

    605

    0

    Posted December 24th, 2004 23:00

    Hi

    Now that you mention it does it after leaving it, then it would suggest an overheating problem which is then casuing something to fail.  The trouble with most diagnostics programs is that they run in DOS and don't really put the PC under much pressure.

    Good luck with getting it fixed !

    Stephen :smileyvery-happy:

  • speedstep

    11 Legend

    •

    46969 Posts

    605

    0

    Posted December 28th, 2004 19:00



    @5JM wrote:

    Hi

    Now that you mention it does it after leaving it, then it would suggest an overheating problem which is then casuing something to fail.  The trouble with most diagnostics programs is that they run in DOS and don't really put the PC under much pressure.

    Good luck with getting it fixed !

    Stephen :smileyvery-happy:






    QUAKE 1.0 for DOS was always my good or bad test.

    Running the Demo in endless loop.
  • patrickacox

    270 Posts

    605

    0

    Posted December 29th, 2004 10:00

    THis may be a long shot but check the capacitors on the motherboard. Are any of them bubbled up? There is a known problem with some motherboards in the gx270's with bubbled or leaking capacitors. THe tops of the capicitors should be flat and smooth.
  • 605

    0

    Posted December 29th, 2004 21:00

    Thanks for the replies. I'm not sure about the Quake thing.... I don't think it's an overheating problem, since I've turned off my computer and touched the heatsink/cpu, and they're barely warm. (I know it's not a good test but hey).

    It MAY be the capacitors. I actually read that around here and once I'm back at school with my computer I'll check it out. Thanks for your replies!
  • 605

    0

    Posted January 16th, 2005 00:00

    So Dell sent me a new motherboard and things are working again. I actually noticed that between teh ram slots and the AGP slot, there's a capacitor with its top bulging. I think that's the problem!!