UNSOLVED

loki660

updated

23 years ago

L

loki660

5 Posts

0

7844

January 12th, 2004 14:00

I need to reformat my dell 8300, but it won't boot from cd...

Through a sequence of events I ended up deleting many many files that had a worm on them, files which I needed, Stupid me let the anti-virus program delete windows files and everything, so I really don't know how much is gone and now I need to reformat my computer to get those files back so I can actually do more than just surf the internet.

I'm guessing that with windows xp "reformatting" is the same as reinstalling windows... so I followed the instructions and got to where I can select boot from cd-rom (the windows xp cd is in the drive, and I know the drive recognizes it) but when I press enter, it just boots windows up normally, normally being a black background because the display properties is deleted...

Anyway any suggestions on how to reformat my computer and get it fully up and running again would be welcome.
  • msil217

    2 Intern

    •

    1997 Posts

    282

    0

    Posted January 12th, 2004 14:00

    I had a problem like that once. I thought I had the bios configured correctly, but I didn't.(I'm not sure if this is your case)
    Insert CD. Turn off computer, then turn it on,and start tapping the "F-12" button on your keyboard (before it can boot into windows). Choose to boot from atapi CD Rom.

    I hope this helps.
  • Mary G

    6 Operator

    •

    20095 Posts

    282

    0

    Posted January 12th, 2004 15:00

    If it truly recognizes the cd in the drive, you will get a message "Press any key to boot from CD." If you don't get that, the boot sequence is wrong or you didn't save the configuration changes. If you get that message and press Enter and it still doesn't boot from cd, your keyboard is not being recognized before Windows loads. USB keyboards have this problem. To solve this--go into the bios and enable Legacy USB devices--not the exact wording, but you'll see it on one of the tabs, save the changes and try it again.

    edit: Reinstalling XP is not the same as reformatting. Check over at the Windows XP forum for more info. This is really a software problem, not hardware.

    Message Edited by Mary G on 01-12-2004 12:58 PM

  • loki660

    5 Posts

    282

    0

    Posted January 12th, 2004 16:00

    Ah, I got it to work... This is strange though.  I have two cd rom drives, a dvd-rom and a burner... Now, when I was in windows I put in the Window XP disc and in the dvd drive and it didn't read it, after waiting for minutes... Then I'd put it in the burner and it read the cd just fine so I know it recognized it and that's where the cd was when I tried the F12 and boot from cd, even though on mine it says "IDE cd-rom" not "atapi cd-rom" as msil217 suggested, and that made me think to switch cd drives, and sure enough it worked in the dvd-rom drive... and as I type it is reformatting =).

    Thank you for your help!

  • loki660

    5 Posts

    282

    0

    Posted January 12th, 2004 19:00

    Allright well... I'm my roommate's computer typing this... Windows seems to be installing correctly, but it's been stuck at saying "approx. 34 min" for well over 2 hours now, and the little green bar is not moving.  Though the screen changes to stating different features of Windows XP and there's a little semi progress bar below that that is movies.

    Anyway I don't know if I should restart, or just let it keep going, overnight maybe...?

    Any suggestions?

    I'll look to the windows xp forum as well, thanks for the tip.

    Also if reinstalling xp isn't reformatting, how do I reformat?? 

    Message Edited by loki660 on 01-12-2004 03:35 PM

    Message Edited by loki660 on 01-12-2004 03:46 PM

  • deesmygal

    274 Posts

    282

    0

    Posted January 12th, 2004 19:00

    Restart and do it over it appears that it hung on the reboot

    When you reinstall WinXp you should delete the partition and then re-create

    a new partition in the space selected (highlighted) if you desire to change the size of the partition
    this is when you can do that for example I have several 160Gb hard drives and I have them partitioned into several
    drives one for games  one for pictures one for Office. I think you get the picture.

    If you dont want to do that then just leave the value at the indicated value and proceed. After doing that it will
    prompt you for the type of format Quick or Normal select what you want.

    I usually select normal, but it takes longer.

    Reply back with how you make out!!!!!!!!!!!

    Message Edited by deesmygal on 01-12-2004 04:13 PM

  • deesmygal

    274 Posts

    282

    0

    Posted January 12th, 2004 20:00

    hold in the power on button until it turns off and then on the splash screen press f12.

     

  • THE3RONE

    72 Posts

    282

    0

    Posted January 12th, 2004 20:00

    there should be only one choice for which IDE device to boot from select it

    the disk should be in the first cd drive.

  • lambo2

    60 Posts

    282

    0

    Posted January 12th, 2004 22:00

    Just go to www.winsupersite.com/showcase/windowsxp_sg_clean.asp 

    And follow the instructions.

  • loki660

    5 Posts

    282

    0

    Posted January 13th, 2004 04:00

    Well I'm finally posting from my own computer, which means I got everything to work.  Though I had to use a different disc than the one that came with my computer, that disc would just not work.  All others did though, and now I'm up and running.

    Thanks everyone for their help.