UNSOLVED

shobuwari

updated

17 years ago

S

shobuwari

5 Posts

0

3992

August 27th, 2009 14:00

I got my dell xps 435mt and I have few problems..

I purchased dell xps 435mt from dell outlet about 10 days ago.

 

spec:

 

i7 920

2x1gb 1066mhz

dvd-rom

19-1 memory reader

3450 hdmi video card

360watts PSU

 

problems:

 

1. I tried to upgrade my video card to 8800gt 512mb or ati 4830 1gb, but I found out PSU doesn't have any 6-pin for my card.

2. USB slot sometimes does not recognize. (I have wireless usb adapter for internet) I have to reboot to make it work.

3. video card ati 3450 hdmi is connected to my LCD TV and sometimes I don't get any sound and I have to reboot or change to regular tv channel to get sound.

 

Questions:

 

1. Do I have to upgrade my PSU?

2. I have not done any bio update, but is this necessary?

3. I want to overclock my CPU and I want to if bio will let me overclock this beast.

4. is this overkill for HTPC?

5. I been reading some xps 435 thread and i was wondering if it's necessary to buy 1333mhz or 1600mhz ddr3 memories...  or is it worth the extra $$$

  • D.Lewis

    23 Posts

    182

    0

    Posted August 28th, 2009 02:00

    The Dell supplied 360w PSU does have a single 6 pin connector for graphics, a load of these systems have the HD4850 fitted as an option and they use a single connector. I've just dug my original PSU out of the wardrobe (replaced mine) to check. The connector is in there somewhere!!

    The BIOS update from Dells site is an easy, quick and worthwhile update as it sorts out the noisy exhaust fan issue. Mostly...

    I wouldn't bother upgrading your RAM (speed) as I understand this machine only recognizes 1066Mhz (people will no doubt correct me on this if I'm wrong!) and I personally don't think you'd see a deal of difference anyway.

    What will make a difference to you though is that you only have 2 gig and therefore dual-channel only- why not buy four more sticks of the same RAM you have now and get 6 gigs in TRI-channel? A cheap upgrade and will give it a considerable kick up the performance backside!

    NO, you cannot overclock. Dell has no plans to release a BIOS which will allow us to either as far as I know.

    Sorry, don't know about your USB adapter- any firmware/software updates (Google) or maybe even try another USB port?

    Regards

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    182

    0

    Posted September 1st, 2009 13:00

    There is some confusion concerning the 435MT and 435T -

    Studio XPS 435MT DDR3
    F680F 1GB PC3-8500 1067Mhz 128X64
    Y996D 2GB PC3-8500 1067Mhz 256X64
    TW149 1GB PC3-10666 1333Mhz 128X64
    P223C 2GB PC3-10666 1333Mhz 128X64

    Studio XPS 435T DDR3
    F680F 1GB PC3-8500 1067Mhz 128X64
    Y996D 2GB PC3-8500 1067Mhz 256X64
    N852H 4GB PC3-8500 1067Mhz 512X64


    DELL-Chris M (old account)

    #IWork4Dell

  • shobuwari

    5 Posts

    182

    0

    Posted September 1st, 2009 13:00

    Thanks for your advice.

    I ordered 1333mhz 1gb x4 because it was cheaper than 1066mhz memory. If they don't recognize 1333mhz, do they run at 1066mhz speed?

  • shobuwari

    5 Posts

    182

    0

    Posted September 1st, 2009 14:00

    THank you Chris, so 435MT is better than 435T? :)

    I ordered crucial memory because i saw a reviewer said it worked with dell xps studio 435mt.

    I currently have pc3-8500 2 x 1gb installed. Is it good idea to combine with 4 x 1gb pc3-10666 memory?

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    182

    0

    Posted September 1st, 2009 14:00

    The 435T has a bigger power supply, holds more ram, and has more motherboard slots. The PC3-10666 will clock down to your PC3-8500 memory.


    DELL-Chris M (old account)

    #IWork4Dell