UNSOLVED

ShawnP

updated

18 years ago

S

ShawnP

41 Posts

0

8092

September 27th, 2008 21:00

Huge amounts of time are being lost, but I've narrowed down the problem and still need opinions

Over a week ago, I made this post about losting time:

 

http://www.dellcommunity.com/supportforums/board/message?board.id=dim_other&message.id=369543#M369543

 

I haven't been home much, and when I try to turn the computer on, it's dead until I unplug the power supply, then plug it back in. It has gotten to the point where I would actually lose a day of time, and the time wouldn't update unless I corrected the date first.

 

Last night, I decided to do a test, and unplugged the power supply after shutting down. Today, I plugged it back in, and the time and date are perfect. I'm ready to buy a new power supply, but how would the power supply, or possibly an improper connection, cause problems with time?

  • x_lab rat

    1976 Posts

    501

    0

    Posted September 28th, 2008 14:00

    A gradually failing clock battery can make all kinds of strange things happen, time changes and startup problems.  Replace it and see what happens.  It's a whale of a lot cheaper than a power supply.
  • ShawnP

    41 Posts

    501

    0

    Posted September 29th, 2008 05:00

    Thank you for taking the time to reply, but if you read through what I've already done, you'll see the battery was the first thing.
  • x_lab rat

    1976 Posts

    501

    0

    Posted September 29th, 2008 15:00

    Correct, I did not click the link. This site takes forever to load pages, even on a 5M connection. It pulls scripts in from several servers and completely reloads them on every page change rather than allowing buffering. It even overrides the browser 'back' buffer.  I don't mind the time spent responding, but waiting for something to happen is aggravating.  I guess I have patience issues.

     

    If the PS were not producing the 5V pilot supply, computer wouldn't start, but battery should take over clock as it does when unplugged. Thus, the PS is not supposed to be able to make the clock stop. But anything is possible.

     

    Intuition suggests the problem is in the chipset, but I wouldn't tell you to buy a new motherboard on the strength of my intuition--I probably wouldn't either. I might try this: At the time when the power switch is not responding, jumper P1 green wire to any black wire. If the fans run, the PS was willing to start but not being commanded to start by the chipset. If fans do not run, PS has a problem, whether that's causing the clock anomaly or not.

     

     

    Message Edited by x_lab rat on 09-29-2008 11:38 AM
  • ShawnP

    41 Posts

    501

    0

    Posted September 30th, 2008 04:00

    Jumping wires is beyond what I feel comfortable doing with my pc. I can tell you for certain that every time I shut my pc down, I unplug the power supply connection on the pc itself. I plug it back in a day later, and time is perfect. I have done this multiple times. Before this, with the power supply left plugged in, I was losing hours, then over a day's time.

     

    It's an old pc, and the parts I've installed are worth more than the pc itself. If it comes down to it, I'll just research what the best AGP based system was before they switched to PCI-E, and transfer the parts. Thanks again for the help.