UNSOLVED

2nd2none

updated

22 years ago

2

2nd2none

14 Posts

0

8120

August 4th, 2004 10:00

Front audio output jack not working...

I replaced the Sound Blaster live 5.1 card and it was different from the original one, it had one less output plug on it.  On the original one it had a plug for an aux. output jack which went to the front of the computer. The new one does not have this aux. plug.  I noticed a plug on the motherboard that uses the same connector so I plugged the wire connector from the front port to the mother board,  thinking this would make the front jack work.  Well it does not.  And the same thing with the modem I replaced, the instuctions state that this modem will work with voice support through the sound card but there is no connector that goes from the modem the the sound card.  So I plug the sound card into the mother board where I think it says telephony. 

Is there a way to make the front audio jack work? Are these connectors off and need to be turned on??

Please Help

Thanks 

  • DjKwik1042

    64 Posts

    245

    0

    Posted August 4th, 2004 16:00

    Well the connectors are not off they are just not working due to a connection problem. My belief is that whne you connect a PCI sound card or PCI Express sound ard (coming soon) that the headphone connector in the front is automatically disabled. I'm not exactly sure if calling Dell Support would but it is worth a shot. Hope you can get this problem fixed, and I'll keep on eye out for answers to your question just in case Dell Doesn't help you out.
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    245

    0

    Posted August 4th, 2004 19:00

    The Dell OEM sound cards are special models and one of the special functions is the front panel Headphone connection.  Retail sound cards do not have this capability.  I monitor the Audio section of the forum regularly and don't recall anyone having any luck getting the front panel Headphone jack to work.
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • vmansd

    502 Posts

    245

    0

    Posted August 4th, 2004 21:00

    I put a retail SB Live! into my Dim 4500, and the SB card had the matching header for the front panel headphone jack. This can be seen in some of the illustrations of SB cards on the Creative website.

    To the OP - the header for the front jack that you plugged into on the motherboard would support onboard sound chip - not what you want in this case.

    An alternative to examine is getting a headphone/speaker switch - found in many computer/office supply stores, and online, (www.cyberguys.com has the one I use). This will plug into the speaker output, speakers and headphone (including mike) plug into the switch.

    Val