UNSOLVED

Janene1

updated

23 years ago

J

Janene1

23 Posts

0

11118

November 10th, 2003 16:00

Dimm 4400 Memory

Not sure if this right board, but recently I replaced my motherboard and processor and installed new memory. However, I keep getting a cannot boot record: system halted error.

My question is, can I use Kingston memory purchased from anotehr vendor instead of Dell memor? Is the memory for DEll priority as well?

Any help is appreciated?

Janene 

  • LittleAdvice

    1 Rookie

    •

    1070 Posts

    140

    0

    Posted November 10th, 2003 16:00

    Janene1,

    Memory is not proprietary. You should check to make sure that the memory meets the specifications for your system. You can check the specifications on the following link.

    http://docs.us.dell.com/docs/systems/dim4400/specs.htm#1103227

  • Janene1

    23 Posts

    140

    0

    Posted November 10th, 2003 16:00

    Done that already and memory specs match.

    Would the non ECC make it not work?

  • llbandit

    515 Posts

    140

    0

    Posted November 10th, 2003 19:00

    Janene1

    Your specs call for non-ECC, so that is not the problem. Have you checked the diagnostic lights on the back of the tower?

    John
  • llbandit

    515 Posts

    140

    0

    Posted November 10th, 2003 20:00

  • Janene1

    23 Posts

    140

    0

    Posted November 10th, 2003 20:00

    yes

    At first the AB lights are the yellow color. CD are green

    then they alla re green