UNSOLVED

starfleetlcars

updated

25 years ago

0

5838

February 19th, 2002 20:00

Dimension startup tedious ram counting

When I start up the comp (w/o quiet boot, w/o quick boot), I see the ram being counted really slowly, e.g. 8mb/sec, all the way to 256mb. As you can imagine this takes a long time. It wasn't like this when the comp was new(w/o quiet boot, w/o quick boot), but after this 'slowness' appeared, it has endured from winME to winXP. So I'm wondering how to treat this w/o making the comp quick boot. Thanks.

  • speicher46

    21 Posts

    136

    0

    Posted February 20th, 2002 11:00

    I had this happen to me about a year ago and I could not find any help anywhere. I finally stumbled into the fact that one of my USB devices plugged into a Belkin USB hub was causing this. You might try to simply unplug all of your USB devices and see if the problem is corrected. If so, plug them back in one at a time and find the culprit....
    I found this sort of thing is ususally due to peripherals so if not USB try unhooking the rest of your peripherals one at a time. Hope this helps. I was extremely frustrated over this for a long time.