
Solved!
Go to SolutionL
LoneWolf3574
73 Posts
0
7864
January 23rd, 2009 22:00
Dimension 4300 Problems
Ok, so I'm doing my brother a favor & replacing his old HDD with a new one and upgrading his CPU from a 1.5Ghz to a 1.8Ghz (I had it laying around). His original problem was that it would only boot as far as the logon & then completely restart when you tried to login or let it set for a couple of minutes, I figured it was his HDD since it was making a loud whining noise up until it did the hard reboot.
I've got WinXP Pro SP3 installed, I decided to let XP check/update the video driver through the device manager since he was running such an old video card (GeForce 3 series). After the update installs, everything goes black on the screen, the power button starts flashing amber, and I can't get the system to restart. I unplug it & let it set for a few minutes figuring something had overheated (it is about 7 years old after all). I plug the power back in after looking around inside for hotspots (none found curiouser & curiouser), push the power button, I hear and see all the drives spinup & test, but no POST (hmm). There was no beep, nothing, there weren't even any lights on the keyboard, just the amber (aux power) & green (system power) LEDs on the motherboard and all the fans were spinning (that's really weird).
First I tried to reset the BIOS by removing the battery for 5 minutes (after I unplugged from the outlet & discharged the PSU), no success. Then I unplugged everything & removed all PC cards, leaving just the power to the motherboard, the cpu, & the memory in place. I got 2 short beeps and the 4 LEDs (ABCD) on the back are green green green yellow, I have no idea what those are all about but I thought they might be important. Watching the LEDs before the beeps occur, I get YYGG, GYYG, GGYY, YGGY, and finally GGGY as it beeps 2x. I am assuming the first 4 are tests & the last 1 is what the problem is.
PLEASE tell me I'm wrong in thinking the motherboard just died.
Dimension 4300 - 1.8Ghz CPU, 512Mb PC133, 80Gb WD HDD, WindowsXP Pro SP3, SB Live! Platinum, Cnet NIC, Nvidia GeForce 3 series
Responses (1)
Solutions (0)

LoneWolf3574
73 Posts
252
1
Posted January 24th, 2009 14:00
No answers? That's cool. I just figured it out. When I put the old video card back in originally, the 4 LEDs were YGYG. I happen to have an old AGP ATI video card sitting around (Radeon 64Mb All-In-One I think) and installed it. Now I can get into the BIOS. It took a few tries, ok about a dozen, before I figured out that when I reset the BIOS, I also had to set the drives to AUTO and OFF for the installed and empty points on the IDE cable or nothing would start. Lesson learned, always keep a few old PC parts around, you never know when they'll come in handy and save you money. :emotion-2: