UNSOLVED

linsworld

updated

19 years ago

L

linsworld

3 Posts

0

11860

June 28th, 2007 10:00

Dimension 2300

My dimension 2300 motherboard was down last Tuesday. Where can I get one to replace? What type of form factor of this motherboard? Micro ATX, BTX or ?
  • SR45

    2 Intern

    •

    12138 Posts

    232

    0

    Posted June 28th, 2007 11:00

    This might be a good time to replace the system all together, find a refurbished newer system, with all the new technology for about $410.00 on up without monitor from Dell's Outlet store.  Your system is mighty old now, entry level at best, and not really worth the cost of a new 2300 motherboard. 
     
    You can try however, to look on E-Bay for a replacement Dim 2300 if you wish.  Others in the know, will weigh in on other suggestions.
     
     


    Message Edited by SR45 on 06-28-2007 08:10 AM
  • linsworld

    3 Posts

    232

    0

    Posted June 28th, 2007 13:00

    Totaly agreed but just want to reuse the case with PSU. Maybe buy the new motherboard and cpu combo and plug them in but not sure the form factor of motherboard can fit in. Also, the PSU looks weird. Maybe not the stand Micro ATX.
  • 232

    0

    Posted June 28th, 2007 13:00

    I have a 2350 and I agree with SR45. There is no way I would put another penny into this 2350. Get something newer.
     
    I haven't posted in a long time, but I wanted to say thanks to SR45 for all the help to everyone, with your massive 16,506+ posts!
  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    232

    0

    Posted June 28th, 2007 14:00

    FWIW, you can get a 2350 motheboard from Dell Spare parts fer around $80.  (Improvement over the 2300)  Fits in the same case, should use the 2300 processor.
     
    Also, if the 2300 power on at all, then like immediaqtely shuts down, check to see if the heat sink retainer is broken.  If the retainer is broken, it is a $10 fix


    DELL-Donald K
    #IWork4Dell

  • SR45

    2 Intern

    •

    12138 Posts

    232

    0

    Posted June 28th, 2007 15:00

    To Larry Parker.... Thank you so very much for that comment.  Much appreciated