
UNSOLVED
T
treyzaphod
114 Posts
0
1382
December 9th, 2004 14:00
Did I Fry My 9800 Pro
Due to low frame rates in MOHAA 2 I decided to try a mild overclock of my 9800 Pro. I ran ATI Tool to determine my highest core and memory settings and it returned 399/374. I backed this down to 396/372. Everything seemed to be working fine. However, when ran a demo version of Unreal Tournement 04 I noticed black spots or snow in the game. Thinking my card was running hot from just running ATI tool I decided to turn the PC off and allow it time to cool. Later I started it up and turned ATI Tool off so my card would run at it's normal clock speed, but when I ran UT04 again the snow was there.
Could I have damaged the card? I haven't noticed black snow in other games and I did not play UT04 before the overclock so I don't know if I would have had this problem before I OC'd the card. Is there a way to determine if I damaged the card or if the problem lies with the game or ATI driver?
I'm running the latest chipset and referance drivers.
Dimension 8300
P4 2.8
RAM 512
Dell ATI 9800 Pro
Audigy 2
Responses (2)
Solutions (0)
treyzaphod
114 Posts
106
0
Posted December 10th, 2004 02:00
Good news! I'm an idiot! It would appear I jumped the gun on this one. As soon as I saw the black snow on the opening cut scene in UT04 I I freaked and immediatley left the game beleiving I had just fried my card. It appears the "snow" on the cut scene imay be part of the games design to give the scene atmosphere. Once the cut scene finishes and the game loads the snow disappears. Just to be sure I installed the Demo on my father's 8200 with a 9700TX card (which has never been OC'd) and the snow was there again on the cut scene.
Chris, I appreciate your advice, but thankfully I will not have to put it to use...not this time anyway.:smileyhappy:

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
106
0
Posted December 9th, 2004 14:00
Use the Tool to reset the card defaults. Click Start- Turn Off Computer- Restart.
* Click Omega Drivers
* Click Ati Radeon
* Click your operating system
* Click RADEON OMEGA DRIVERS
* Click Save
* Click Desktop
* Click Save
* Click Driver Cleaner
* Scroll down until you see the word Download
* Click the grey icon under the red arrow
* Click Save- Desktop- Save
* Click Start- My Computer or double click the My Computer icon
* Open the C: drive
* Right click on the downloaded DC3Setup_33.zip file, hold the right mouse button and drag the icon onto the C: drive. Let go with the right mouse button
* Choose Extract
* Click Next
* Click Next
* Remove the check
* Click Finish
* Disconnect the system from the internet
* Click Start- Control Panel - Add or Remove Programs
* Select the Ati driver you want removed and then click the Change/Remove button
* The InstallShield Wizard dialog box, select the Remove check box
* Click Next
* If you get a window for "Remove Share Component", click "Yes to All"
* If you get a window for "Remove Share File", click "Yes to All"
* Click Yes
* When finished, close all boxes. The system will want to restart
* Restart the computer
* At the first beep or on the blue Dell screen, tap the F8 key or the F5 key
* At some point, the Advanced Options menu will appear
* Select Safe Mode [Press the Enter Key]
* Select the first or only operating system listed [Press the Enter Key]
* Windows might load a default video card driver, that's ok. Just get to the desktop
* Open the C: drive
* Open the DC3Setup_33 folder
* Double-click the file setup.exe
* Click Next
* Insert a dot to "I accept the agreement"
* Click Next
* Click Next
* Click Next
* Click Next
* Click Install
* Click Next
* Clean every Ati listing
* Click Finish. Don't restart the system
* Double-click the downloaded Omega driver from your desktop
* Click Next
* Click Next
* Click Next
* Click Next
* Click Next
* Click Next
* Insert a dot to "I agree.."
* Click Next
* Click Start
* Click OK
* Click OK
* Click Next
* Insert a dot to "I agree.."
* Click Next
* Click Next
* Click Next
* Click Close
* Click Finish
* Click Yes
* Click Next
* Click Yes
* Click Continue Anyway
* Click Continue Anyway
* Click OK
* Click Finish. The system should restart and do some possible refresh testing
DELL-Chris M (old account)
#IWork4Dell