UNSOLVED

rewers

updated

15 years ago

R

rewers

5 Posts

0

41109

November 9th, 2011 15:00

Dell XPS 8300 Fastest Possible Hard Drive

Hello guys,

I'm satisfied owner of XPS 8300! Now I'm looking to add one more internal hard drive. Is it any possibility to ad 1000rpm SATA-II hard drive, or any SAS 1500rpm? 

This hard drive will be used only for recording audio in DAW sequencers.

  • osprey4

    6 Operator

    •

    34230 Posts

    732

    0

    Posted November 9th, 2011 16:00

    Hi Rewers,

    The fastest drive you could add would be a solid state drive. Any rotating disc drive is going to be about the same.

  • rewers

    5 Posts

    732

    0

    Posted November 9th, 2011 16:00

    Ok, is there any chance to install sas drive or sata-II on my computer (xps 8300)?

    Thanks

  • jsktx

    1 Rookie

    •

    729 Posts

    732

    0

    Posted November 10th, 2011 06:00

    On an XPS 8300 motherboard, the first two ports are SATA III and the last two are SATA II.  So you can install SATA III hard drives or SSD to the first two ports.  I have a Vostro 460 and uses the exact same motherboard as the XPS 8300 and I have a SATA III SSD on the first port.

  • osprey4

    6 Operator

    •

    34230 Posts

    734

    0

    Posted November 10th, 2011 17:00

    To answer your question, the XPS 8300 does not support SAS drives.

  • rewers

    5 Posts

    734

    0

    Posted November 11th, 2011 04:00

    So only SATA-II and SATA-III available . Now.... Dell instaled on the first 2, cd rom and my OS hardrive, would be good if i move CD rom to SATA-II and connect new SSD to SATA-III?

  • osprey4

    6 Operator

    •

    34230 Posts

    734

    0

    Posted November 12th, 2011 05:00

    Yes, you definitely want an SSD using the faster available controller. The optical drive is so slow, it makes no difference.

  • Ian Pugh

    1 Rookie

    •

    33 Posts

    734

    1

    Posted December 19th, 2011 15:00

    I've got 2 Intel 510 120gb SSds in my XPS 8300 configured as RAID 0. They work fine, amazing speeds (925mb/s on CrystalDiskMark) and they were easy to fit. I put two in a caddy and placed them in an empty drive bay. there are plenty of power connectors spare in the 8300 to power them.

    make sure you use Sata port 0 (and Sata port 1 if you add 2 SSDs) as thses are the two SATA 3 ports that run at 6gb/s. The other ports are Sata 2 are run slower at 3gb/s. You'd still get great speeds from Sata 2 but not the full potential.

  • Mike1.6

    5 Posts

    734

    0

    Posted January 27th, 2012 09:00

    Ian, what method did you use to transfer the boot partition and contents to the new SSD's.  I haven't been able to find a satisfactory explaination.  Thanks.

    Mike

  • Ian Pugh

    1 Rookie

    •

    33 Posts

    270

    0

    Posted January 27th, 2012 11:00

    if your current system is non-RAID and non-SSD I would not advise the transferring and cloning option. Partly because Windows detects whether or not it is being installed on an SSD and makes some system adjustments if it is. All the technical forums (certainly wouldn't count this as one!) recommend a fresh install when changing to RAID or SSD,

  • Ian Pugh

    1 Rookie

    •

    33 Posts

    734

    0

    Posted January 27th, 2012 11:00

    Hi,

    I just did a clean fresh install which is always recommended, I had the operating CD from Dell which you can always order if you didn't order it at time of purchase. After that it was a case of putting the drivers CD in and running through the list. Some peole have tried making an image of the original drive and transferring it to the SSDs but without success.

    Remind me what you're doing - you're going to use 2 SSds in RAID 0?

    I'd also recommend downloading the most recent version of Intel rapid Storage Tool and SSD Toolbox as they are consderably newer than the one on the driver CD.

    Let me know if you need any help with this.

    All the best,

    Ian