
UNSOLVED
F
FatCatTycoon
11 Posts
0
20413
July 18th, 2015 08:00
Dell XPS 27 - Need to restore my secondary SSD after putting OS copy on it
My Dell XPS 27 (2TB HDD, 32GB SSD) running win 8.1 went down two weeks ago and I could not gain access until I used a thumb drive to install a copy of the OS onto the SSD. I was then able to reinstall win 8.1 onto the HDD, running SeaTools to repair the issues with the HDD. Things appear to be stable now.
However, now I need to restore the PC to its original state so the SSD can be used like it was before, but I don't know how. I deleted the Windows files on the SSD and reformatted it. It now appears as an empty volume that is not being used. How can I get my system back to the way it was, when the SSD was used to speed up the computer? I don't believe the OS was originally installed on the SSD but I can't be sure. How should this PC be configured, from a BIOs and SSD setup?
Thanks!
- John
Responses (4)
Solutions (0)
FatCatTycoon
11 Posts
486
0
Posted July 22nd, 2015 21:00
Thank you very much for your reply. However, I printed out the instructions you indicated and went through my settings to set the SSD as a cached drive and it still is showing as dormant.
I have taken screenshots of the menu system and what the settings currently are. I found the SATA settings under Advanced>Onboard Device Configuration:
The sub-menu of that was already set to AHCI:
I don't know if there may be something wrong with my BIOS or if that even matters. I went through a lot to get the HDD accessed and fixed the last time and may have switched something important. Here is a screenshot of that menu:
Any idea as to why the SSD still will not act as a cache drive?
Philip_Yip
11 Legend
•
16052 Posts
•
65915 Points
486
0
Posted July 23rd, 2015 00:00
You have the SATA mode set to AHCI and not Intel Smart Response Technology.
FatCatTycoon
11 Posts
486
0
Posted July 23rd, 2015 12:00
I do not have that option in the menu. I can set it to ATA, RAID or AHCI. According to the instructions here:
http://www.pcworld.com/article/248828/how_to_setup_intel_smart_response_ssd_caching_technology.html
I should set the SATA mode to RAID. But if I do I get the blue screen "Your PC ran into a problem and needs to restart.." error. The blue screen flashes in an instant before restarting. It just goes on a loop at that point between the blue screen and the startup window saying "Preparing Automatic Repair".

Philip_Yip
11 Legend
•
16052 Posts
•
65915 Points
486
0
Posted July 19th, 2015 16:00
The 32 GB mSATA SSD would have been setup as a SSD cache drive. See here:
http://dellwindowsreinstallationguide.com/ensure-you-have-the-correct-sata-configuration-in-the-bios-setup-for-your-configuration/
I advise replacing the mSATA SSD with a 256-512 GB Crucial MX200 and setting the SATA operation to AHCI to use it as a boot drive. This will offer far superior performance.
Change of the SATA operation requires a Windows Reinstall. Since this is a Windows 8.1 OEM license its recommended you reinstall from a FAT32 formatted USB flash drive with SecureBoot being enabled in your UEFI BIOS settings. See here for details:
http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-windows/download-windows-8-1-retail-and-oem-iso/
Windows 11 Installation Guide
Windows 7 Installation Guide