UNSOLVED

SPAT61

updated

23 years ago

S

SPAT61

36 Posts

0

5812

November 6th, 2003 23:00

Dead Dimension 4100

I need help please.   I have a Dim 4100 with no power at all.  Here is what I did so far with no success:

Replaced power cord with a known good one and connected directly to a wall socket with good 120 V power.

Removed and replaced both power connectors at MB using care to reseat properly

Disconnected all drives

Removed and reseated the video card

How do I determine if I have a bad PS or a dead Motherboard?

Thanks for your help.

Steve

 

 

 

  • BigBrother

    2 Intern

    •

    4801 Posts

    82

    0

    Posted November 7th, 2003 00:00

    SPAT61,

    Before you consider replacing a motherboard or power supply, some more diagnostics may be helpful.  Unplug all power from the system.  Disconnect the monitor and remove the video card.  Remove all PCI cards.  Remove all memory sticks.  Disconnect the gray cables and the power cables from ALL drives.  Leave the fan, power supply and the cable to the power button connected.  Leave the processor and heat sink where they are.  Remove the mouse, keyboard and ALL external items.  Near where the power cable connects is a small red switch.  Flip it back and forth several times.  Re-seat the power supply connectors again.  Plug the system in to power.  Press the power button.  Do the fans start up?  On the back of the system near the keyboard socket are 4 small LED lights.  A,B,C,D.  Are any of them lit up?  Does the system make any beeping noises?  If it makes beeping noises, (probably 3 or 4 beeps) and the fans come on and some of the LED's light up, the power supply is probably good.  Shut down, disconnect power, wait for the light on the motherboard to go out and install one memory stick.   Power up again.  What happens then?  Different beeps?  Different LED's on the back of the system?  What LED's?  What beep sequence? 

    If all is well at this point, shut down, wait for the light on the motherboard to go out and reinstall the video card.  Try again.  You should get either no beeps or one beep and the LED's on the back of the system should be Green,Green,Green,Yellow.  If so, then your power suppy, motherboard processor, RAM and video card are good.  Repeat this process of shutting down and reinstalling ONE internal component at a time until you find the component that kept the system from starting up. 

    Of course, if the system will not come up at all after stripping it down, then testing the power supply would be the next step.  Unless you are comfortable with a multimeter, then I would leave this to a professional technician.  The power supply in your Dell is propietary.  If it is failed, you will not be able to purchase it just anywhere.  You can call the Dell Spare Parts number at 800-372-3355 (US) if you need a replacement.

    Steve

  • jamac010

    9 Posts

    82

    0

    Posted November 7th, 2003 13:00

    I had this same thing happen to my 4100 just before the 3 year warrenty expired.

    Pressed the power button, and nothing...almost like it wasnt plugged into the wall.

    My first thought was power button or PSU.  Ended up being the motherboard.

    I called dell and spent 2 hours on the phone ripping my computer apart again, just to prove to the guy, it really want powering up!   They sent me a ps, power button, and motherboard.

    I found out it was the motherboard by testing good products. Dont really know a way to test any other way, but look to see if a green led  is lit when trying to turn the computer on.