UNSOLVED

Marillion

updated

25 years ago

M

Marillion

8 Posts

0

6358

November 7th, 2001 17:00

Cody (Dell) - Confirm Noisy Fan Fixed?

Could you confirm (or deny) that the new fan folks are receiving, the NMB 3612KL-04W-B66, is Dell's recommended fix to the noise problems with the 4300 and 8200 Dimensions? If so, have all the tech's been informed as to this? Late last week, I spoke wit a tech. that was not aware that there even was a problem.

Thank for any information.

  • AlanKS

    241 Posts

    296

    0

    Posted November 7th, 2001 22:00

    I've been able to fix a noisy fan recently with no parts whatsoever and its easy. Try removing the manufacturers label off of the fan if you have one, in my case it was stuck on off centre and causing the fan to vibrate.

  • 296

    0

    Posted November 8th, 2001 02:00

    A Dell technician replaced the Datech fan in my 8200 with a NMB fan, and the noise problem is fixed.


  • DELL-Cody

    2 Intern

    •

    2166 Posts

    296

    0

    Posted November 8th, 2001 20:00

    marillion: While the replacement fans that resolve the fan noise problems within the Dimension 4300 and 8200 series do not have a different part number than the fan originally shipped in the system, the replacement fans that are currently being sent via field service do resolve the issue.

  • Marillion

    8 Posts

    296

    0

    Posted November 9th, 2001 00:00

    Cody -

    Thanks for getting back to us on this topic. Using the same part number for the old and new fans explains problems I've had when discussing the matter with the Dell techs. It is also appearent that not all techs are familiar with the problem although it appears from this list to be a prevelent problem.

    I guess the take-away for folks is that the problem appears to have been resolved with the new fans and that requesting a a replacement fan at this point in time will get us the new quieter NMB fans. For reference, the part number is: 7G538

    Thanks again!

    Marillion