UNSOLVED

luuie

updated

21 years ago

L

luuie

14 Posts

0

7283

November 13th, 2005 15:00

Clean install of Windows on D.4700 with NO floppy

hello

I have a D.4700 with XP home and I want to replace it with my XP Pro. Ideally, I want to do a clean reinstall but this 4700 comes with a SATA primary drive and I don't think XP supports SATA natively so I will need to install SATA driver during the setup. However, I have NO floppy drive on this system. Am I hosed?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    80

    0

    Posted November 13th, 2005 15:00

    No, but you will need to prepare a slipstream install CD of XP with the proper drivers.

    http://www.maximumpc.com/2005/01/how_to_slipstre.html
  • simpswr

    2 Intern

    •

    3224 Posts

    80

    0

    Posted November 13th, 2005 17:00

    Floppy Drives are dirt cheap these days . . you can buy a drive and cable for less than $20, attach it to the motherb oard and power and just let id dangle for the installation . . goes much smoother . . .
  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    80

    0

    Posted November 13th, 2005 20:00

    No driver needed, Sata is supported natively
     
    Once XP is installed, you need to install the Chipset utility, then Video, then audio, etc
     
    R79695.EXE
     
    at support.dell.com is the chipset utility, you can get most all your drivers there.
     
    If you haven't reformatted yet, all the drivers you'll need are in the C:\drivers folder on the HDD as shipped from Dell


    DELL-Donald K
    #IWork4Dell