UNSOLVED

elmo lincoln

updated

21 years ago

0

9066

December 1st, 2005 02:00

capturing VHS tapes with TV tuner card

I'm trying to figure out how to capture VHS tapes and eventually convert to DVDs. I'm trying to capture with Roxio Easy Media Creator. I have a Hauppage WINTV-PVR-500 MCE tv tuner card that I use with XP Media Center. I can record tv, and have no problem using that recorded video in Easy Media Creator. I can even capture the cable television signal that comes through the tv tuner card directly with the Easy Media Creature capture utility. (The Hauppage tuner shows up on my list of devices. I select tuner and the video shows up on my preview screen.) The tv tuner card has both composite and s-video inputs. But when I connect composite cables (the red/yellow/white plugs) from my tv/vcr combo set to the tv tuner card in my computer and select "composite" in the capture utility .... I get no video in the preview panel and am unable to capture anything. I do get sort of a dark gray static image, but there's no picture at all. And it says capture failed. Any ideas what I'm doing wrong? I admit it could be the 13-inch tv/vcr combo I'm using. It's cheap and old. Would my best bet be to get a vcr with s-video output to use with the set-up I have? How would I set that up to capture my VHS tapes? Just plug an S-video cable between the VCR and the tuner card? Any suggestions on reasonably priced VCRs to use for this?
  • sparke63

    43 Posts

    1562

    0

    Posted December 1st, 2005 11:00

                     elmo lincoln,
    are you sure your using outputs of vcr to to computer inputs?sure the old tv/vcr outputs are working? I personaly use a n axternal capture box from vcr using composite video and audio cables on a 10year old vcr. for software I have always had the best luck with what came with the capture box, at this moment I am captureing old kids movies. Then burn will burn them to dvd for a daycare center. I use roxio 7 for the burn program. It is alot of trial and error to find what works for you. I never had 100% using other ways to capture and burn anolog video to digital conversion with other stuff. I prefer nero for alot of things but for this I use roxio 7 or 6  for the burn and encoding the signal from the hard drive to disc. The capture boxes I have had succes with are called ads which you can even get at Walmart for about 70$, I gave one of those to my father and he transfered 200 plus movies to disc. just remember if the original tape is old and in poor quality there is not alot you can do to make it better, it will still be poor quality on dvd disc, but sometimes things are not replaceable and at least it won't deteriorate any more on disc. Also be aware you are limited to 120min capture from anolog tape to mpeg2 format for a standard dvd disc. Some things even though less than 120mins can be  larger than a 4.7 gig disc can hold, like some animated cartoons and music videos. I had one 119min music video that was 5.5 gigs, had to use a dual layer dvd disc or stop capturing and burn half to one disc then start again where I left off and finish to a 2nd disc. but all set top dvd players will pretty much handle reading mpeg2 format. mpeg 4 allows for much greater compression and alot longer capture but very few dvd plaryers can read that yet.        hope this helps shorten your learning curve a little.

                                                                                                          markDimension 4600, xp home, sp-2, bios A-12
    3.0ghz with ht
    2 gig pc3200 ddr sdram @400mhz
    maxtor 250 gig sata hd with 16mb buffer
    maxtor 300 gig sata hd with 16mb buffer
    maxtor 300 gig external hard drive
    16x dvd rom
    nec 3540a dvd - rw burner
    floppy drive
    msi 6600gt video card with vivo
    plextor px-402u,{ video capture box }
    PC Power and Cooling, Turbo-cool 425 atx-Deluxe
  • 1562

    0

    Posted December 2nd, 2005 04:00

    Thanks for the help. I did manage to capture from my VCR with my TV tuner by using Sonic MyDVD.