UNSOLVED

gotapex

updated

19 years ago

G

gotapex

28 Posts

0

21061

June 12th, 2007 20:00

Can't update SAS 5i/R BIOS on Precision 690. Error: The PCI System BIOS NOT Present!

I'm trying to update my current firmware to the lates (Firmware Version ---- 0.10.49.00, Option BIOS Version - 6.12.02.00, NVDATA Version ------ 0x0D.  Dell version: A03).
 
The error message I get is:  Error: The PCI System BIOS NOT Present!
 
The release notes say:
 
*******************************************************************************
** NOTE:  Your SAS5i/R Integrated Controller must have at least the minimum
**        FW Version of 00.06.50.00 to use this update package.  If not,
**        please download, and flash your adapter with, 00.06.50.00 before
**        attempting to flash with this release package.
*******************************************************************************
 
My SAS shows version 6.06.00.02
 
 
 
Does anyone know what I need to do to be able to flash this?  If it requires a different flash before, where would I get that?
 
Thank you.
  • gotapex

    28 Posts

    283

    0

    Posted June 12th, 2007 20:00

    Nevermind, using the floppy version worked fine.  Upgraded to 0.10.49.00 FW and 6.12.02.00 BIOS.
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    283

    0

    Posted June 12th, 2007 20:00

    Great I need to do mine so I guess its floppy time!

    Message Edited by tphillips63 on 06-12-2007 04:50 PM
  • Tribolet

    8 Posts

    283

    0

    Posted June 27th, 2007 13:00

    Only works with Floppy???
    Can someone else tell me how to do this without a Floppy?
    Thanx
  • gotapex

    28 Posts

    283

    0

    Posted June 28th, 2007 05:00

    I don't know if it only works with a floppy, but I know my system only did.  You may want to try the hard drive version first to check.
  • Tribolet

    8 Posts

    283

    0

    Posted June 28th, 2007 06:00

    Hard Drive version has to boot to DOS anyway...
    So I guess my question is how to Boot in DOS in VISTA 64-bit without a Floppy?
    Any ideas?
     
    Thanks
  • Dennise458

    1 Rookie

    •

    101 Posts

    283

    0

    Posted June 28th, 2007 11:00



    @Tribolet wrote:
    Hard Drive version has to boot to DOS anyway...
    So I guess my question is how to Boot in DOS in VISTA 64-bit without a Floppy?
    Any ideas?
    Thanks





    You should be able to use a USB floppy drive, or make a bootable CD with dos and the bios update file on it.