UNSOLVED

johnalanwinter

updated

22 years ago

0

4231

January 29th, 2005 19:00

Can't Install nVidia PCX 5300 (PCI-E) into Dell 4700

Have tried lots of methods but when the PC boots up the screen is blank, no output.
You can hear the windows logon sound but cannot see anything to complete the install.
 
Have tried the following....
1. disabling graphics adaptors in Device Manager
2. Shutdown
3. Change BIOS to auto rather than onboard and restart
4. Machine boots but no signal is output from card.(Either on the DVI or Analog output)
5. Installing a driver from Gigabyte
first hoping that card will then be recognised.
6. If you leave monitor connected to onboard error message appears "you can't use onboard card because you've installed a card". Won't boot
 
I can't think of anything else to try..
Is it that the Gigabyte nVidia Geforce PCX 5300 is just NOT compatible with a Dell 4700?????
 
Someone help, please
 
 
 
  • mblrds

    10 Posts

    281

    0

    Posted January 29th, 2005 19:00

    Not real sure on this but you may need to disable the intregrated card first. I think you can do it in BIOS. I seem to recall seeing instructions on how to do that somewheres here-about.

    edit: Found it. Go into the FAQ at the top of this page and click on the TWEAKS thread. Number 6, I believe.

    Message Edited by mblrds on 01-29-2005 03:37 PM

  • techking

    49 Posts

    281

    0

    Posted January 30th, 2005 15:00

    you need to make sure that you don't connect dvi and analog at the same time. If you have a dell flatpanel, in most cases the '-' key on the monitor switch between analog and dvi. Have you tried the selftest from the monitor (remove datacable to your videocard). Is that ok? When exactly do you have this problem? You mention that you can't finish a windows installation. I'm wondering how you started it to begin with, if you don't see anything. Ah well, i'm just a m0r0n and bittorrent is slow, but thats another story.
  • techking

    49 Posts

    281

    0

    Posted January 30th, 2005 15:00

    you need to make sure that you don't connect dvi and analog at the same time. If you have a dell flatpanel, in most cases the '-' key on the monitor switch between analog and dvi. Have you tried the selftest from the monitor (remove datacable to your videocard). Is that ok? When exactly do you have this problem? You mention that you can't finish a windows installation. I'm wondering how you started it to begin with, if you don't see anything. Ah well, i'm just a m0r0n and bittorrent is slow, but thats another story.
     
    PS. By the way, i just looked up the specs for your motherboard. Its an 16x pci express slot. So i don't know your card, but it should be compatible with this speed. Bye bye now.