
UNSOLVED
BIOS won't detect any drives
I have a Dimension 8200 that worked fine until recently. About two months ago, I turned the machine on and the system wouldn't boot, because the BIOS didn't detect any drives (none of the drives at all). I turned the machine off and back on, and everything was fine. Two weeks later this happened again. Dell tech support told me to clear the NVRAM. This seemed to solve the problem. But now, every few days this same thing happens again -- once I clear the NVRAM it will boot up fine, but it seems bizarre that I have to keep clearing it. I contacted Dell tech support again and they've told me to open the case and reconnect all my drives and reset the whole boot sequence -- but this doesn't sound like the right fix for this problem.
Any suggestions?
Thanks.
Dell Dimension 8200
Pentium 4, 1.80 GHz
512MB RAM
Running Windows XP Pro
Responses (4)
Solutions (0)
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
249
0
Posted May 15th, 2003 13:00
Tomboy65,
They are the ones on the Dell Resource Cd.
Jesse L (retired)
You might also try replacing your cables from the drives... maybe there's a short somewhere in them. Also, they may be too small, and getting pulled out when you close the case... I had that problem with a machine where the cables were rubber-banded into a bundle.
The new cables will cost you less than 10 bucks at a local computer supply store, and you can even get the nifty thin-wire ones that help airflow. It's worth a shot.

Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
249
0
Posted May 15th, 2003 12:00
Tomboy65,
Thank you for using the Dell Community Forum.
Sometimes reseatting cables will resolve the issue. You may want to go ahead and give it a try. If that does not work contact Support@dell.com and see about what to do next. Possibly replace some parts. You may also want to run the Dell Diags just to see if all is working fine.
Jesse L (retired)