UNSOLVED

Jjooaann

updated

20 years ago

J

Jjooaann

8 Posts

0

13578

April 17th, 2007 14:00

All USB ports are dead after plugging in SimpleTech external hard drive -- pls help

I unplugged a thumb drive on the front USB port on my Dimension 8300 running xp and plugged in a SimpleTech external hard drive. Although device manager tells me that all USB components are working, the computer did not "see" the drive, and then I discovered that all the USB ports on the computer are dead. I have done the following: (1) deleted USB hubs and controllers, then restarted, (2) deleted all drivers and reinstalled them, (3) disabled power management, (4) installed Dell's Driver Reset Tool, (5) reinstalled Windows XP, (6) tried various hotfixes that Microsoft has on its website for USB problems. Nothing has worked; the only hint I have is that when I reinstalled Windows I got a message that the computer could not find omci.sys, which appears to be a Dell driver file. I cannot find omci.sys on the Dell installations disks or on the Dell website. Does anyone have any ideas as to what could be wrong: is there a piece of hardware that controls all USB ports that could somehow have been broken by this SimpleTech drive? Thanks in advance for any help.
  • x_lab rat

    1976 Posts

    930

    0

    Posted April 17th, 2007 15:00

    If you plug a USB keyboard in, does any light show on the kybd, even momentarily?  Does a USB optical mouse light up?  If not, somehow the external HD appears to have blown the USB power fuse.  This shouldn't be possible.  Makers of USB accessories know that USB power is limited.  Even if the USB wire is connected before external power (actual drives, that is, with motors, require external power) the device should not attempt to operate off USB power alone as this would blow the fuse.  But obviously something happened.
     
    I think you have taken the proper steps to restore USB ports disabled by software disagreements.  If indeed the USB fuse is blown, you have two options--well, 2 1/2.  A repair shop can solder a new fuse on top of the blown one (they're not user-replaceable).  A powered hub might make the ports accessible again (that's the half-option).  Otherwise, motherboard must be replaced.
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    930

    0

    Posted April 17th, 2007 19:00

    Search your boot hard drive. There should be a backup copy of omci.sys in the folder i\386. Copy it, don't move it, into c:\windows\system32\drivers.

    If you don't find the file, go to Dell's site and see if there's a version of Dell's Desktop System Software (DSS) available for this model. Download it and install in Safe Mode. Reboot normally. Maybe that'll provide the missing file.

    And if replacing the file doesn't do it, then x_lab rat may be correct, the USB HD fried the motherboard. :(

    Ron
  • Jjooaann

    8 Posts

    930

    0

    Posted April 18th, 2007 02:00

    I plugged my Sansa mp3 player into one of the USB ports, which is how it gets charged, and it did charge up. Does that mean it can't be a blown fuse, and I'm back to looking for a software problem?
  • x_lab rat

    1976 Posts

    930

    0

    Posted April 18th, 2007 16:00

    Yes, that would indicate power is still coming out the USB ports and the fuse is not blown.
     
    It looks like a pretty stubborn software issue, considering what you've already tried.  You might repost (with the additional evidence) in the software forum.
     
    There is still a hardware possibility, like you hinted at initially, there IS one chunk of hardware that does USB, it's a permanent part of the motherboard and it also does drives and a number of other functions, even the power button.  Just the USB part of it could have failed, but how that could be related to an external USB HD I couldn't guess.  Had you used this X-HD before successfully?
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    930

    0

    Posted April 18th, 2007 17:00

    Hang on a nano-second...

    Did you install the CHIPSET driver when you reinstalled XP? The chipset is required for USB function and should have been the first driver installed after XP. Download it to your desktop, reboot in Safe Mode, install the chipset and reboot normally.

    http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R58201&SystemID=DIM_PNT_P4_8300&servicetag=&os=WW1&osl=en&deviceid=3268&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=27&fileid=70069

    Ron
  • Jjooaann

    8 Posts

    930

    0

    Posted April 19th, 2007 03:00

    Tried installing the Chipset software -- no effect. The computer is now also acting strangely on start-up. Very much appreciate any other ideas.
  • x_lab rat

    1976 Posts

    930

    0

    Posted April 19th, 2007 15:00

    Go to F2 setup, onboard devices, disable USB altogether (no loss at this point, not working anyway).  See if the startup behavior returns to normal.
     
    If this 'acting strangely' happened with no USB plugged in and it goes away with USB hardware disabled, that points in the direction of a hardware problem (though not conclusively).
     
    You may be able to tell, that the success of diagnosing hardware online, sight-unseen relies to an extent on computers doing a lot of the same things for a lot of the same reasons over time.  It's our 'knowledgebase'.  One-of-a-kind problems are going to be difficult to resolve this way.
     
    Can't see the whole thread, but you did 'system restore', right?  That would have returned the system software to the way it was when you took it out of the box--ready to run with everything working.  If that failed to restore USB, this also points in the direction of hardware.
     
    I hesitate to guess with your money--we don't have conclusive evidence hardware is faulty--but you may be looking at motherboard replacement.  Try the system board diagnostic under F12, also found on the 'resource CD'.  If it finds an error, that's 3 things pointing at motherboard.
  • Jjooaann

    8 Posts

    930

    0

    Posted April 20th, 2007 02:00

    I had indeed tried System Restore before reinstalling Windows but the system would not restore to any prior point. I will pursue the other means you suggest of making a differential diagnosis. I did just learn that I could purchase a PCI Board with usb ports that might forestall having to replace the motherboard. Thanks again for the help.