
UNSOLVED
C
chuckburmester
26 Posts
0
9844
September 1st, 2007 12:00
710H2C with 720 board questions
1. Do we call our systems 710’s or 720's now?
2. Can Dell put an option on the “dñvers and downloads” page for what motherboard you have? (This one's for Chris)
3. I have a 710 with the 720 board, do I update to the A03 bios that is for the 720?
4 | Should I have installed some kind of chipset drivers or something after the board change? The only thing I installed is the quickset program and I was having trouble with my display drivers so I installed the 163.44 beta drivers and that solved my display driver problem. I talked to XPS support and he did not know of any drivers I needed to install but he had never heard of the motherboard exchange program either.
Thanks in advance,
Chuck
Responses (11)
Solutions (0)
- I am not sure why Dell will show our system as a 700 only even after upgrading. When a 700 or 710 user signs in under their account Dell will still show us 700 or 710. This maybe for accounting purposes or for some other statistic purpose. Dell said that when we called and gave them our service tag, they would know that we have a 720.
- I am calling my Dell XPS a 700-20 since I have a 700 originally and was upgraded to the 720 board.I would think that a 710 or 710HC customer would call their board 710-20 or 710HC-20I am sure Dell will or should know the 700 series was upgrade to the 720 just by the a service tag.Dell should come out and at least call a 700B or 710B since the board has been replaced.Not really worried that the board drivers are located under the 720.
chuckburmester
26 Posts
572
0
Posted September 1st, 2007 17:00
Hi gdwrnch,710 H2C680i board A03 biosvista 32 ultimate upgraded from xp proqx-6700 3.46 ghz2-160g 10,000 rpm raid 0320 and 250 gig 7200.10 data drives4 gig DDR2 667 ram2 - 8800 GTX video cards 163.44 driversX-FIAvast anti virus and windows firewallEver since the machine was new, disk management has the raid array as disk 2 and acronis disk director has it as disk 3 as windows labels them 0 1 2 and acronis labels them 1 2 3. It never seemed right to me. I figures the boot drive should be 0 in windows, or 1 in acronis disk director.Let me know if you need anymore info.Thanks again,Chuck
Message Edited by chuckburmester on 09-01-2007 01:55 PMchuckburmester
26 Posts
572
0
Posted September 1st, 2007 17:00
Hello Everybody, thanks for the responses, I upgraded to the A03 bios and everything went fine. Then I tried to install the nVidia MediaShield Storage 9.92 Vista32 Application that was under the 720 drivers and downloads, and it blue screened on reboot, I rebooted to the last good config and called XPS support, tried it again with the tech talking me through it and it did the same thing, he said if it was working fine before to revert back to the older version. When the April update came out for mediashield, that update would not install either. He looked in his documentation and he couldn't figure out why it was posted as urgent. Does anyone have any ideas on what I am doing wrong when installing the mediashield update. I shut down anti-virus, all applications and windows defender.Thanks again,Chuck- chuck,I just formated a drive, and did a clean install of Vista x32 to try to duplicate your issue. I installed Vista, then mediashield, and it went right in. I didn't do it on a raid array, and I see you did an upgrade, not clean. Maybe it's conflicting with the sata drivers that you already had indtalled. At any rate, if it's working good, I wouldn't try updating your sata/raid drivers.
chuckburmester
26 Posts
116
0
Posted September 1st, 2007 19:00
Thanks for trying gdwrnch, yes everything seems to be working as it should. Guess I will get to enjoying the new board.Thanks again everyone,Chuck

cademetz
2 Intern
•
1327 Posts
572
0
Posted September 1st, 2007 12:00