UNSOLVED

RichardN_TO

updated

14 years ago

0

16729

October 29th, 2012 22:00

Windows 8 & Nvidia GeForce GT675M on M17X

Hi

just upgraded to Windows 8 and it will not recognise my nvidia card on the M17X.

it currently just uses Intel HD 4000 graphics despite trying to install the drivers from the dell support site and the nvidia driver site.

Anyone else experiencing this problem.

Win7 was perfect but Win 8 less so.

Thx

  • 1414

    0

    Posted October 31st, 2012 11:00

    Have you tried Fn+F7? What revision is it? Only the R4 is supported on Windows 8 by DELL.

  • 1414

    0

    Posted October 31st, 2012 12:00

    Thx for replying.

    Subsequent to the above message, i attempted a restore without any success and also updated the BIOS to A09.  after the BIOS update, windows then did recognize the video card.

    It is the R4 purchased, July 2012 from Dell Canada.

    I did try Fn & F7 and this caused the computer to restart without any change.

    The issue seems to be an error in installing the nVidia driver, it will not complete and returns an error in the driver properties stating "A service installation could not be found in the inf".

    From the device manager, all I can see is a Standard VGA driver adaptor, which i assume is the nVidia driver before update.  There is also, unknown device/unknown driver which i believe to be the Intel driver attempting to update.

    Not sure if that is useful for a diagnosis, if it is, please let me know any suggested remedy.

  • BooByz

    8 Posts

    1414

    0

    Posted October 31st, 2012 13:00

    I have the same exact problem. I got off the phone with Alienware support. I was told that this is a known issue with the MX17's and that it is a BIOS issue. I was also told that their engineers are trying to figure it out and release a BIOS update. If you come up with another solution, please let us know. Thnx

  • BooByz

    8 Posts

    1414

    0

    Posted November 1st, 2012 07:00

    any1 have any updates? this is getting very frustrating

  • 1480

    0

    Posted November 1st, 2012 18:00

    there's a new driver available for the nvidia card.  you'll have to use the link below to download it as the download link from the dell site won't work.

    what i did was ensure the current driver was the standard vga driver.

    then using the nvidia installer i choose the custom option and did a clean install.

    seems to have worked, currently reinstalling all games and will test it out.

    good luck

    downloads-us.dell.com/.../Gfx_NV_P11_306.97_1FWD3_setup_ZPE.exe

  • BooByz

    8 Posts

    1480

    0

    Posted November 1st, 2012 21:00

    i tried the new driver, still have the same problem. i even did the clean install. when i run my games, its very choppy and i dont hear the nvidia card kicking in as it usually did with windows 7. any luck with you?

  • 1480

    0

    Posted November 3rd, 2012 17:00

    for the limited time i kept Win8, it seemed to work fine. i ran into other problems with Intel storage drivers so i went back to Win7 for now. same driver is working fine there. hope you sort it out. good luck.
  • Drirr

    8 Posts

    1480

    0

    Posted November 14th, 2012 13:00

    I also upgraded m17x r4 to Win 8 and I also had the same problem.

    Under the official Dell downloads is missing Command Center when WIN 8 is selected (this software calibrates all FN keys specific for alienware, including the auto-video-card switch, this auto-switch makes sure that when you start 3D program/game PC will use GFX card)

    I installed command Center from Win 7 downloads, it does not work properly but in the destination folder are .exe files...one of them is calles something like "video switch.exe" when I ran this EXE the PC switched manually to GFX, rebooted, installed nvidia driver and since then it runs on GFX nVidia driver (I am having 675) ... all 3D games work even better than under Win 7... and I don't miss the onboard 4000 intel video at all.

    another thread: Microsoft forum

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    692

    0

    Posted November 14th, 2012 14:00

    Drirr,

    Good workaround!

    The same CC should be listed under Windows 8 64-bit.

    2.8.8.0, A01-00
    M11x-R3, M14x-R1, M14x-R2, M17x-R3, M17x-R4, M18x-R1, M18x-R2
    http://ftp.dell.com/FOLDER00633308M/2/App_NT_AWCC_W7_X03_Setup_XTN7J_ZPE.exe

    Under Compatibility Operating Systems it lists -
    Microsoft Windows 7 64-bit
    Microsoft Windows 8 64-bit


    DELL-Chris M (old account)

    #IWork4Dell

  • 1480

    0

    Posted November 14th, 2012 14:00

    Have you contacted us already? If not, it might be a good idea.

    AWSocialMedia@dell.com Include your contact info and service tag