TheQMannX

updated

13 years ago

T

TheQMannX

7 Posts

0

98988

March 14th, 2014 13:00

Alienware Aurora R1 to R3/4 motherboard upgrade

My old intel i7 920 cpu seems to be dying, and was looking to see if I could swap in a newer generation motherboard (R3 or R4), and purchase a new CPU separately.  Has anyone had luck in doing this?

 

 

  • Alienware-Naomi

    6 Operator

    •

    1776 Posts

    1664

    0

    Posted March 14th, 2014 13:00

    Hi!

    In order to install the AURORA R3 or R4 Motherboard, you'll have to also replace the Master I/O board and the CPU. It's also possible the that ports on the back will not fit properly. 

    In that case, I recommend getting just the new CPU. These are the validated processors for the AURORA R1: 

    YNCMX   i7-930, 2,8GHz, 8MB
    0DX14   i7-950, 3.06, 8MB
    152W9    i7-970, 3.2, 12MB
    60GFP i7-975, 3.33, 8MB
    F3VGJ i7-980X, 3.33, 12MB
    HXGV2 i7-990X Six Core, 3.46G
  • TheQMannX

    7 Posts

    1664

    0

    Posted March 14th, 2014 14:00

    How would I go about ordering one of those from dell?

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1666

    0

    Posted March 16th, 2014 14:00

    My old intel i7 920 cpu seems to be dying, and was looking to see if I could swap in a newer generation motherboard (R3 or R4), and purchase a new CPU separately.  Has anyone had luck in doing this?

    Don't assume Intel i7-920 chip is bad unless you saw it fail in another machine and/or motherboard. This is not common. A bad motherboard is more likely.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1666

    0

    Posted March 17th, 2014 19:00

    Oh, and there was very little thermal paste left between the cpu and heatsink, covering about 1/8th of the chip.

     
    Pretty lame. I assume you properly installed some? I don't think that by itself could hurt anything permanently (seems like it would just throttle back). But that combined with 24/7/365 OC MIGHT spell disaster for i-920.
     
    Also, IIRC, 920 was never a good/stable OCer.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1078

    0

    Posted March 17th, 2014 19:00

    The CPU has been mildly overclocked and running nearly 24/7 for over 4 years.  

    Removal all overclocks. Continuous OC can damage processors and motherboards.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • TheQMannX

    7 Posts

    1666

    0

    Posted March 17th, 2014 19:00

    Oh, and there was very little thermal paste left between the cpu and heatsink, covering about 1/8th of the chip.

  • TheQMannX

    7 Posts

    1666

    0

    Posted March 17th, 2014 19:00

    So the windows crash dumps have error messages in the WHEA record about errors in the cache and MCA, all in bank 5.

    The CPU has been mildly overclocked and running nearly 24/7 for over 4 years.  

    I've had it crash windows, the dell diagnostics on the hidden partition, and the windows cd installer.  

    RAM checks and every other test I can find have passed.  

    Upping the core voltage by +40mV causes it to happen more often.

    No new parts have been added in the last year, and was working fine until last week.

  • TheQMannX

    7 Posts

    1666

    0

    Posted March 17th, 2014 20:00

    Right, and those conditions led me to think that the CPU was thermally damaged, thus my original question.

  • OldDocX

    1 Message

    1666

    0

    Posted January 2nd, 2015 11:00

    How do you know which Rx model you have?  My service tag is Service tag removed per privacy policy>.I *think* it's an R1 but not sure.  Did this processor upgrade work? I'm considering it myself...

    Thanks, Doc

  • TheQMannX

    7 Posts

    328

    0

    Posted January 2nd, 2015 19:00

    I had an R1 from mid 2010.  The fix did work.  I ordered a used Intel i7 920 CPU (same as original) off eBay, and it solved the bluescreen errors completely.  My guess was some damaged CPU cache.