Pro 14 Plus PB14250 Ubuntu 24.04.3 LTS - No sound when switching output
Hi there,
Issue is the following: sound works fine on the internal speakers.
When plugging headphones on the jack audio port, they are well recognized as Output device (displayed in the sound menu).
Signal seems to be sent (the bar moves according to signal) but no sound is heard in the headphones.
If I reboot with the headphones plugged in, the behaviour is the opposite: sound is heard in the headphones but when unplugging them, no sound is heard (though signal is sent) in the speakers.
Some info:
uname -a Linux XxxXXX 6.14.0-37-generic #37~24.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Nov 20 10:25:38 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
inxi -A Audio: Device-1: Intel driver: N/A Device-2: Intel Lunar Lake-M HD Audio driver: sof-audio-pci-intel-lnl
After boot with headphones & headphones selected, when running rhythmbox: $ pactl list short sinks 55 alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__hw_sofsoundwire_0__sink PipeWire s32le 2ch 48000Hz RUNNING 56 alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__hw_sofsoundwire_2__sink PipeWire s32le 2ch 48000Hz SUSPENDED
After boot with headphones & speakers selected, when running rhythmbox: $ pactl list short sinks 55 alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__hw_sofsoundwire_0__sink PipeWire s32le 2ch 48000Hz IDLE 56 alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__hw_sofsoundwire_2__sink PipeWire s32le 2ch 48000Hz RUNNING
Pipewire is displaying a message about jackaudio, would that be the issue? $ systemctl --user status pipewire.service ● pipewire.service - PipeWire Multimedia Service Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled) Active: active (running) since Mon 2026-01-05 15:55:36 CET; 1h 21min ago TriggeredBy: ● pipewire.socket Main PID: 2720 (pipewire) Tasks: 3 (limit: 18411) Memory: 18.6M (peak: 19.2M) CPU: 11.251s CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service └─2720 /usr/bin/pipewire
Jan 05 15:55:36 systemd[2697]: Started pipewire.service - PipeWire Multimedia Service. Jan 05 15:55:36 XxxXXX pipewire[2720]: mod.jackdbus-detect: Failed to receive jackdbus reply: org.freedesktop.DBus.Error.ServiceUnknown: The name org.jackaudio.service was not provided by any .service files
For information, when plugging a USB sound card with the headphones plugged on it, it gets recognized and appears in the sound menu. I can then switch between the USB sound card, get sound in the headphones and come back to the internal sound card and get sound in the speakers.
So it seems there is a conflict when the internal sound card has to deal with two outputs.
@Mike_Joe I think I've found a (very simple) solution. I've installed package ubuntu-restricted-extras and now everything works like a charm! Maybe Dell should install it by default (if there are no license conflicts).
Restarting pipewire with `systemctl --user restart pipewire` didn't work for me, although I have the exact problem that the TS had. Installing ubuntu-restricted-extras didn't seem to help either ((
Thanks to the knowledgeable folks in this thread for finding a workaround for this issue.
Restarting pipewire works for me, immediately for system sounds but I do have to restart apps like spotify as well for the fix to take effect. Installing ubuntu-restricted-extras didn't do anything, unfortunately.
Does anybody know if any progress has been made for this issue since January in terms of a permanent solution?
Mike_Joe
1 Rookie
•
2 Posts
•
2 Points
0
2
Posted January 6th, 2026 15:47
After some more digging, the issue seems to be linked with pipewire.
Indeed, when plugging the headphone, restarting pipewire makes the sound heard in the headphones while no more on the speakers.
As a workaround, running
systemctl --user restart pipewire
when plugging or unplugging the headphones will be good enough for the time being...