I have a new, pre-production cluster of X410's. Support had me update OneFS to 7.1.1.4, then Node Firmware package 9.2.3, then Drive Firmware support package 1.6. All of the updates completed successfully, but it did not update the firmware on my SSD drives in Bay 1 of each node. The cluster wants the drives replaced, and keeps sending alerts to Isilon support. For each node I have the alert "The drive in Bay 1 has firmware version A100 which does not match the configuration installed on the cluster. Please install the appropriate Drive Support Package and update firmware"
Support had me power down the cluster, the bring it back up and try to format those drives. That didn't work. They had me reinstall the Drive firmware package, that didn't work either. (I have verified that it is not a "No SSD" firmware package)
In the About this Cluster section, there are alerts for Cluster Firmware CMCSDR_Honeybadger, CMC_HFHB, and IsilonFPV1.
Anybody have any ideas of how I can get these drives back online, and get their firmware updated?
So, I'm wondering why the Drive firmware package didn't update them, and will it update new ones? Do I try Drive firmware update 1.7? They all showed up as failed, simultaneously, right after the firmware updates were installed. So, I don't think they are actually failed drives. Is there any way to force a firmware update of those drives? They are the only SSD's in the cluster.
Were I you, I would tell them in no uncertain terms that unless they had a resolution for you immediately, they need to send you fresh SSDs with updated firmware (note that you PROBABLY won't get updated firmware on the new SSDs, but as soon as you install them, you should update their firmware.)
Thank you. I already have an SR open. We were all thinking this was a firmware issue, so they were holding off on dispatching replacement drives. But I just updated the SR with new information, so they decided that they need to be replaced.
In order to install the drive firmware on the drives the disks would need to be up and HEALTHY. So you would need to re-add the drives back to the cluster before attempting to upgrade firmware again.
We would like to send you some replacement drives regardless, as being in support we like to error on the safe side.
If you can open an SR with the following information I can ship you some new SSD's drives. As carlilek said if needed we can assist with the firmware upgrade once replaced.
Grab the Serial numbers off each node just for us to validate we're sending the correct replacement drives.
# isi_for_array -s isi_hw_status |grep SerNo
Once you have the SR number you can PM me or post it in a reply.
To create a service request, you have a couple options:
Wanted to check in and make sure that the Drive got on site and that the replacement of the drive allowed the firmware package to be installed successfully.
carlilek
2 Intern
•
205 Posts
1615
0
Posted July 20th, 2015 08:00
So it actually smartfailed all the SSDs? The alert is generally something ignorable, and that typically won't trigger a flexprotect on those drives.
Just to check, you're not using L3, right?