UNSOLVED

Kumayl

updated

3 years ago

K

Kumayl

1 Message

4

4879

April 7th, 2020 09:00

Inspiron 7391 2-in-1 Network Problem

Hi.

My laptop does not pick any available network, even though other devices that I use are connected to the WiFi. When I troubleshoot the problem, it says that the "Intel (R) Wi-Fi AX201 160 MHz adapter is experiencing driver - or hardware - related problems." I have tried uninstalling / reinstalling the driver, but the connectivity problem persists. The driver is up to date, and I have used another laptop to download the latest upgrades. 

Thanks in advance! 

  • mahesh_007

    1 Message

    3919

    2

    Posted June 5th, 2020 11:00

    i have  the same issue

  • RMDSN

    1 Rookie

    •

    14 Posts

    3841

    0

    Posted June 29th, 2020 07:00

    I too have the same problem. Not resolved.

  • 3773

    0

    Posted July 9th, 2020 21:00

    My issue resolved after motherboard replacement.

  • novachrono

    1 Message

    3707

    0

    Posted July 23rd, 2020 07:00

    Hi @Kumayl !

    I have the same laptop and same problem too (and may happen again at any time). IMO, the issue revolves around Intel driver's bug, power management, and Dell heat management itself.

    Judging by your troubleshoot message, I assume you use Windows Troubleshoot. You might want to use Dell SupportAssist software to double check if there isn't any hardware damage/problem. To do that:

    1. Open Dell SupportAssist and click Troubleshooting tab
    2. Click I want to troubleshoot my PC
    3. Click I want to check a specific piece of hardware, and check if there is any Communication Devices on it. Under normal circumstance, you'll find Network Card and Bluetooth Port. But since we got the same problem here, you probably won't see it because the software find them disconnected.
    4. If you can't find anything in step 3, choose I want to scan my entire PC or I'm having internet issues > I can't connect to WiFi instead.

    Should there is no hardware problem, the troubleshoot result will say something like, "your network adapter works fine, but no driver is been installed yet", or something like that. In that case, at least it's safe to say your AX201 is completely healthy but the driver or everything else are messing up with it. Under some condition, the troubleshoot can fix it for us. But most of the time, it can't.

    Next, you need to check this:

    1. Open Device Manager
    2. Under View tab, click Show hidden devices

    If you see your network adapter hiding there and has an error code 45, it means you have to reconnect the device after being shut off by windows. This is what I found most of the time. Unlucky for us, there is no physical switch which might be able to solve it quickly.

    I tried many things just like what you did; in addition to editing registry, Local Group Policy, etc. Some method works, but just temporary before the problem appears again and again. If nothing comes to your luck, the only two options left are power cycle and re-plugging the WiFi adapter card, which requires us to disassemble our lovely laptop's lower-body part. I risk myself to do it, because Dell service (JP) is very unreliable at a moment and I need it asap for my work. As long as it's not a hardware problem/defect, these methods work well anyway.

    I would normally recommend you to take your laptop to Dell service center since it's the safest option. But if you wanna give a shot, read about 7391 2-in-1 service manual here about how to safely disassemble your laptop.

    To do power cycle:

    1. Make sure to uninstall the driver and disconnect all external devices and AC adapter prior to disassembling.
    2. Disconnect the battery cable from system board. Removing the battery itself is optional, but it's advisable for a more safety practice.
    3. Turn your laptop over, open the lid, and press the power button for about 5 seconds or more to ground the system board. You can do it for 10-15 seconds more to make sure the residual power is completely removed from the system.
    4. Remove and re-plug the network adapter following the manual.
    5. Reconnect the battery cable and everything else.

    In my case, this solve the problem and my adapter works normally again ever since.
    In addition, you might want to do this:

    1. Go to Power Options under Control Panel.
    2. Click Change Plan Settings next to your current preferred plans.
    3. Click Change advanced power settings, Scroll down to Wireless Adapter Settings, and then expand Power Saving Mode.
    4. Click On battery and Plugged in drop downs and select Maximum Performance on both. This will drain more power, but able to prevent windows to, perhaps falsely, turn off your network adapter.

    Next is Power Management setting on your network adapter. I read somewhere that some manufacturer including Dell disable/hide the Power Management option by default. If you can't find yours, follow the instruction here to enable it. After that, do the following step:

    1. Open your network adapter properties on Device Manager and click Power Management tab.
    2. Unchecked the Allow the computer to turn off this device to save power. This will also prevent the system to falsely turn off the adapter under some condition.

    That's it. I suppose these methods will solve your problem as it did on my laptop.

    Hopefully both Intel and Dell can seriously address and fix this annoying problem. I notice that the problem particularly occurred on 7391 when it's overheating. Then, at some unknown threshold point, the network adapter is being shut off by windows; somehow permanently. I think that's the reason why power cycle can solve this problem. But from a customer point of view, this is certainly not the best way to do.

    Disclaimer: please do the power cycle at your own risk. Also, some links here are categorized as external sites even though they are official Microsoft.

  • ditahack

    1 Message

    3635

    0

    Posted August 7th, 2020 23:00

    Hi,

    I ran into the same issue and I realized that the symptom is completely same with it reported by the previous post. The specification of my PC is as follows:

    Inspiron 7391 2n1
    Intel(R) Core(TM) i5-110210U CPU @ 1.6GHz 2.11GHz
    8.00 GB Memory

    The issue was occurred on 29th July, 2020. At that time, WiFi connection was unstable. I thought that the cause of the issue was related to the device drive of Intel(R) Wi-Fi 6 AX201 160MHz. I downloaded the latest device driver (Ver. 21.90.3) from the INTEL web site and installed it. But the issue was not resolved.

    As he said, by selecting the [表示] > [非表示のデバイスの表示] on the Device Manager dialog box, deactivated Bluetooth device and WiFi device were displayed.

    https://drive.google.com/file/d/1ju7Jp7Y8kjdIE6_tdUDZzYzCETmQM6U1/view?usp=sharing

    https://drive.google.com/file/d/1tbNPTw08XFkXSZ-U7rgaUAaCqKKRdnR2/view?usp=sharing

    The error code 45 was displayed as shown in the below screenshot when viewing the property of AC 9560 Wireless network adapter.

    https://drive.google.com/file/d/1NAJr_wsSbJeCXsiEu_El5bxuwC_DV5RP/view?usp=sharing

    Since I don't want to disassemble the PC by myself, I'm waiting for a sincere reply from Japanese DELL support. I'd be happy if the issue will be resolved by the version upgrade of the device driver.

    Kind regards,
    Naoki

  • ScottS

    1 Message

    3426

    0

    Posted September 16th, 2020 03:00

    Hi

    I had the same problem on 15 Sept 2020.  I uninstalled latest Windows update (KB4574727). 

    I down loaded the latest Dell WiFi Driver (May 2020) to another PC and copied to USB disk and then installed driver.

    All is working now.

    Hope this Helps

  • Mrs KB

    1 Message

    0

    0

    Posted September 13th, 2023 18:06

    Same problem, reinstalled drivers to no avail then considered backing out windows (11) updates but have decided to give up trying to fix and am purchasing a TP-Link USB plug in Network Adapter instead.