UNSOLVED

DespiteForDellHelp

updated

7 years ago

0

1749

May 13th, 2020 09:00

Inspiron 15 7000 series reboot issue

I went to turn on my computer and it’s stuck on the dell logo page. It doesn’t have any loading circles under the logo it just gives me the logo and shuts off. I have tried the diagnostics check and it says there’s nothing wrong. I even pressed the F2 button and tried to change my UEFI to legacy but it’s grayed our and won’t let me click to change it. Basically right now all I want to know is how do I factory reset it with no disk or hard drive? 

  • 1412

    0

    Posted May 13th, 2020 10:00

    It’s not on the legacy’s option like you said the option isn’t available. I have tried several times checking the diagnostics I even went on to have it check the memory for two hours and it still says nothing it wrong. 

  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    1419

    0

    Posted May 13th, 2020 10:00

    Undo the "legacy" change.  Unless Windows was installed in that mode, the system will not boot from the internal drive if you change its mode.  Also note that depending on the model of system, legacy mode may or may not be available - if the system is within the last year, legacy mode may be gone as an option.

    start with the hardware diagnostics - F12 at powerup.  

     

  • ejn63

    12 Elder

    •

    31864 Posts

    •

    156337 Points

    1410

    0

    Posted May 13th, 2020 10:00

    Did you run diagnostics on the hard drive or SSD? 

    Does the system setup (F2 at powerup) show the same SSD/HDD setup it did initially?  Or is one or the other device missing?

  • 1408

    0

    Posted May 13th, 2020 10:00

    Do you mean individually running the hard drive or SDD?

    And I’m sorry I’m not sure what you mean by the second question but when I go look at the (F2 at powerup) I don’t see anything about SDD/HDD set up. 

  • Freya009

    1 Rookie

    •

    25 Posts

    1364

    0

    Posted May 15th, 2020 03:00

    Boot into safe mode

    Go to the Start menu.

    Click Settings near the bottom.

    Click on Update and Security.

    Select Recovery.

    Click Advanced startup.

    Click Startup Settings.

    Then click Restart now. More options will show up when your computer restarts.

    Select Troubleshoot to continue.