
UNSOLVED
Closed
Dell OS Recovery Tool not downloading files from dell's cloud image
I have an Inspiron 3459 and a few days ago the 1TB HDD died. I replaced it with a 240GB SSD drive. I followed the steps to create a boot usb and went through the process of SupportAssist all the way to the point of cloud restore, but I am stuck right there. The screen says wa are currently downloading all necessary content for a cloud restore ... There is a green progress bar on 100% Check USB Stick but that's it. Overall 0% and does not seem to download any files. I have tried several times and I have waited for hours to see is it goes to the following steps and nothing. What could I have done wrong?
2 people also have this problem
Responses (10)
Solutions (0)
painful8th
1 Rookie
•
18 Posts
13850
0
Posted October 10th, 2019 23:00
I must add that I tried different sticks. At least one adata 16gb consistently produced a critical error during the usb boot stick creation process, stating that the .zip file would not fit (or something along those lines).
@edhearhow did you manage to get the logs?
painful8th
1 Rookie
•
18 Posts
13860
0
Posted October 10th, 2019 23:00
Similar situation to the OP here, that is a Vostro 3578, whose SSD got replaced by a larger HDD. Used the Dell OS recovery tool (seems to V5.0.0.10857) to prepare a 32Gb USB stick and booted with it. Stuck at the "Reset and update in progress" screen at 0%.
painful8th
1 Rookie
•
18 Posts
13848
0
Posted October 11th, 2019 00:00
Ok, in https://www.dell.com/support/article/gr/el/grdhs1/sln299044/how-to-download-and-use-the-dell-os-recovery-image-in-microsoft-windows?lang=en there's a section entitled What is the Switch to Advanced Mode in Dell OS Recovery Tool and how do I use it?
Basically, instead of creating a boot usb stick that will download from the Dell cloud, you pre-download an entire windows 10 installation. To do so, when running the Dell OS Recovery Tool, press Switch to Advanced Mode from its startup screen and follow the instructions. This time, an entire ISO file will be downloaded.
painful8th
1 Rookie
•
18 Posts
12243
0
Posted April 17th, 2020 01:00
See my post immediately above yours, worked for me.
I have the same issue I have the full iso on a seprate usb. When it starts the reset process it hangs up at 0% and says check USB stick then a few mins later it says it failed. I.dono what to do I have literally tried everything I have read post after post but nothing helps

edhear
1 Rookie
•
3 Posts
14161
0
Posted August 27th, 2019 06:00
I opened the log files and found
19-08-23 23:51:21,326 [0] [INFO ] *****Process Started [BootupSOS]
19-08-23 23:51:21,341 [1] [INFO ] Current Version of BootupSOS.exe is 4.4.2.9869. #StackInfo#
19-08-23 23:51:21,359 [1] [INFO ] IsReleaseBuild:True #StackInfo#
19-08-23 23:51:21,368 [1] [INFO ] OnStartup enter #StackInfo#
19-08-23 23:51:21,435 [1] [INFO ] CryptoUtils.SetSecurityProtocolType:Current SecurityProtocolType is Tls12 #StackInfo#
19-08-23 23:51:21,444 [1] [INFO ] OnStartup enter driveRoots: X:\ ? ? ? ? ? ? ? #StackInfo#
19-08-23 23:51:21,454 [1] [INFO ] get UIAnimationDll path:X:\apps\bin\browsersupport\UIAnimation.dll #StackInfo#
19-08-23 23:51:21,469 [1] [INFO ] Copy the UIAnimationDLL to X:\Windows\System32\UIAnimation.dll #StackInfo#
19-08-23 23:51:21,488 [1] [INFO ] Succeed to write regkey into Registry. #StackInfo#
19-08-23 23:51:21,495 [1] [INFO ] Complete to inject UIAnimationDLL #StackInfo#
19-08-23 23:51:21,520 [1] [INFO ] Import all registry key from X:\apps\fonts\regwork.reg #StackInfo#
19-08-23 23:51:21,583 [1] [INFO ] Import all font mapper registry keys, return code : 0 #StackInfo#
19-08-23 23:51:21,741 [1] [INFO ] SOS setting load base: X:\apps\bin\sys_settings_sos.xml #StackInfo#
19-08-23 23:51:21,749 [1] [INFO ] SOS setting load debug: X:\data\sys_settings_sos.xml #StackInfo#
19-08-23 23:51:21,773 [1] [INFO ] The flag bios supporting SOS is true. #StackInfo#
19-08-23 23:51:22,269 [1] [WARN ] SysSettingsParser file not existed: #StackInfo#
19-08-23 23:51:22,289 [1] [WARN ] ParseOSMapping file not existed: #StackInfo#
19-08-23 23:51:22,418 [1] [ERROR] ParseOSMapping exception: System.NullReferenceException: Object reference not set to an instance of an object.
at utilities.SysSosSettingsParser.ParseOSMapping(String file) #StackInfo#
Any idea?