i just updated my windows OS to windows10 Version 1009 build 17763
my touchpad customized settings were reset and now when i try to change the settings im getting error
The installed touchpad driver is not compatible with this application. pleae download the newest touchpad driver from Dell website. which i have done but still no solution
It seems that this is a 'precision' touchpad that is natively supported by Windows 10, so the touchpad settings applet is no longer necessary - you should just be able to configure it through Windows built-in touchpad settings applet.
Its a shame Dell don't point this out, I'm not sure why the applet download is still available.
Installing (touchpad) drivers through Windows Update - Type Setting onto search box, click Update And Security, and select Check for Updates. Install any available updates and restart computer if required.
What you are seeing with the power light does not agree with the Dell listing for this.
With what you have done is all what I would have done too, except the CMOS battery reset needs the internal battery (and charger) disconnected when you remove the CMOS battery or its not a complete reset. I know its a hassle accessing the battery but at this stage and what its doing/not doing I would do the battery reset again. Disconnect the PC battery and then remove the CMOS battery for at least five minutes. If this doesn't help, the main board (motherboard) would be my first suspect.
JOcean
11 Legend
•
12621 Posts
•
69453 Points
1368
0
Posted September 23rd, 2019 16:00
The following may help and you could also download the driver from the manufacturer's site ( I believe that is Alps).
http://dellwindowsreinstallationguide.com/dell-touchpad-drivers/
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop