Was disappointed to find I have to buy screws to install pcie SSD and 3.5" drive. I found the screws in the manual, and called Dell to order them, but can't have them for more than 2 weeks.
So I'll buy them locally or Amazon or whatever, but want to make sure I get the right ones.
From the manual: "M3x3.5" and "M2x3.5." Does that mean any "M2" or "M3" screws will work, and the 3.5 refers to length in millimeters? Any suggestions of where to get them fast and relatively cheap?
As Ron stated the Homedepot does have the m2 and m3 screws but they are longer that your spec,s you could cut the down but the threads would have to be worked on as cutting them will damage the starting thread. They come in small bags for less than $3 each.
As mentioned, Home Depot has them, but not at the right size. Can't find 3.5mm M2 and M3 screws on Amazon or at Frys.com either.
Anyone know where to get 3.5mm M2 and M3 screws, besides Dell (which will take 2 weeks)? Mail order is fine, but hopefully I won't have to spend $10 on a few screws...
Is anyone sure that 3.5mm M2 and M3 screws even exist? I can't find them via Google search...
Manual for my Inspiron 5675 specifies 3.5 mm M2 and M3 screws for PCIe and SATA hard drive slots I'm adding drives to ("M3x3.5, M2x3.5"). But the computer doesn't come with screws, and Dell said it would take 2 weeks to order the parts. I've checked at Fry's, Home Depot, and Amazon, and also done a Google search, and can't find 3.5 mm M2 & M3 screws. If I use 3 mm screws, could that cause any problems? Anyone know where to get the screws I'm looking for? Does Dell normally not include screws for open slots?
Amazon.com has quite a few variety boxes of these screws but only a couple have the 3.5mm size in the box, it's like five-10 bucks depending upon the variety box you get. Yeah I agree it to sell a machine with a weird size tiny screw for the m2 drive and you don't even get one or two in the goody box for the machine. At least put one in the screw hole! Fortunately i had an external drive box that included extra screws and they happened to fit properly, I was so mad when I got the drive & found it didn't include screws and there wasn't one on the board either. Fortunately I'm a bit of a pack rat when it comes to extra screws they all live in a box or pill bottles for that day I need one. I have an ace hardware nearby but this is a unusual one they don't carry.
Out of curiosity, did you check the inside of the case’s removable panel? After scanning the innards of my new Inspiron 5680 and finding nothing, I was surprised to find 13 screws around the edges of the panel, each labeled “M3.” Since there are also numbered pictures of a 2.5” and 3.5” drive etched into the metal, I assume these must be drive-mounting screws (otherwise, why would they be labeled?). Given that the 5675 and 5680 are so similar, perhaps it has the screws there, too.
wecelliott49
29 Posts
10106
0
Posted May 23rd, 2018 15:00
As Ron stated the Homedepot does have the m2 and m3 screws but they are longer that your spec,s you could cut the down but the threads would have to be worked on as cutting them will damage the starting thread. They come in small bags for less than $3 each.