UNSOLVED

MBlasta

updated

4 years ago

M

MBlasta

11 Posts

0

1073

February 14th, 2023 19:00

Inspiron 5675 late to Update

Long time visitor.....first time poster

So, when I bought my 5675 new, I got the lower end package knowing the better components would be cheaper to add later. Since my HDD has been blue screening on errors lately...that time is now. Thanks to reading threads here for a few weeks, I decided to clone the HDD to a Samsung 970 EVO Plus 1TB (On sale now for 79.99). Found a used Ryzen 7 1800x on Ebay for the same price and a second 8Gb Samsung memory card there also. Got a Red Dragon RGB Keyboard so I can have Blue backlight to match the system..........Last thing I'm looking at is a Nvidia GTX 1070 8Gb.

After reading all the of old threads, I was more than a bit haired out on the HDD cloning, But Samsung Magician and Data Migration Tools made it a no-brainer. I think all I did was disable the secure boot in the BIOS, run Data Migration and unplug the HDD and and re-start......I now have a C:/ OS on the SSD and everything seems normal, except screaming fast!

Now I have questions.....I'd like to keep the old HDD and wipe it (D:/) after a burn in period on the SSD and it looks stable. Would I Enable secure boot before I plug it back in to keep the SSD as the boot drive or is there something else I need to do to stop it from reverting????

 Next I'll be adding the CPU and memory .....Do I need to do anything in the BIOS except keep the secure boot disabled?? ( I'm still not sure exactly what this does or how it works, but I keep seeing it referenced when changing out any hardware )

Lastly a new GPU... Is the GTX 1070 the best choice for the system I will have ( without a new PSU that will . TOS76>power like a refrigerator ). Also 5675 GPU Cable (PCIe) has a extra 2-pin plug on the outer 6-pin plug. Is that to be piggy-backed for a GPU with a 8-pin socket or will I need an adapter

Thanks in advance

  • Chino de Oro

    11 Legend

    •

    8567 Posts

    •

    47218 Points

    456

    1

    Posted February 15th, 2023 06:00

    To keep old HDD in the system, reinstall the HDD, upon power on the PC, tapping on F12 until you get a one time boot menu,  select SSD to boot, use diskpart to clean the HDD, use disk management to prep HDD to use as drive D, restart and system will boot with SSD from now on. 

    No need to change BIOS settings when adding CPU and memory stick, you may receive a message upon boot that amount of memory has changed and system may restart several times.  Secure boot can be enabled unless running into issue.

    Verify if your PSU is a 850w, the 6+2 cable should work fine with 8-pin graphics cards, no need for adapter.  The GTX 1070 is still very capable of playing most games in high settings.  

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    451

    1

    Posted February 15th, 2023 12:00

    @MBlasta  If you've been getting BSODs with that HDD, will you trust it as your D drive, even after initializing it in Disk Management?

    If nothing else, after it's installed and initialized, you should reboot PC, tap F12 to open that menu and select Diagnostics. Run full diagnostics on the HDD and note error messages, number of bad sectors etc, Then use your best judgement whether it's worth the risk vs getting a brand new HDD...

  • MBlasta

    11 Posts

    446

    0

    Posted February 15th, 2023 14:00

    Thanks, Chino de Oro
    Will I still find diskpart and disk management in the Windows Admin Tools? (I got this as a system. Though I built many systems on older OS's, this is my first Windows 10. I'm finding things I knew, are hard to find.)
     
    My PSU is the basic 460Watt. I seen many have that Supply with a Ryzen 7 1700, RX-580, HDD and Hynix SSD. I think I saw Tom's Hardware tested the power draw on the GTX-1070 a tad under that of the RX-580......but I will say that Samsung SSD has got to be sucking some juice cuz it idles at 100 Degrees !!!  I guess the question is, what's the life expectancy of my PSU? I guess my main resistance to changing the PSU (besides snaking cables out and in) is I don't want to have to hack the case to get the AC cable in. This looks like a potential Apevia JUPITER600W Jupiter 600W 80 Plus Bronze
  • MBlasta

    11 Posts

    446

    0

    Posted February 15th, 2023 14:00

    Thanks RoHe,
    Yes, that did occur to me! It's not like I really need the space (yet). I was just thinking about using it as a scatch disc, to store junk on (sort of like my garage).
    I may just leave it unplugged in the case in case I need an emergency back up......... But running a Diag on it is really sage advice which I will follow.
     
    Thanks again..........
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    437

    1

    Posted February 15th, 2023 17:00

    @MBlasta  Hopefully you meant the SSD is running at 100ºF, not 100ºC!  100ºF isn't bad at all, but idling at 100ºC would be terrible! 

    If you did mean ºC, then you should check that all fans are working, and/or you need bigger/better ones, and maybe you should install an efficient thermal pad on that SSD before it fries itself. That said, there are complaints on the net about this SSD running hot.

    Do you know what firmware version is installed on your SSD? According to this, firmware v1.2 sets the "Critical Temp" at 85ºC, and there was at least a firmware v1.3 update back in 2019, when that review was posted. So check with Samsung to get the most recent firmware update for yours...

    BTW: Did you apply fresh thermal paste when you installed the new CPU?  Absence of CPU thermal paste can add to heat issues in other components too.

  • Chino de Oro

    11 Legend

    •

    8567 Posts

    •

    47218 Points

    426

    1

    Posted February 15th, 2023 20:00

    Yes, diskpart is built-in Windows tools, refer to this page to refresh your memory.

    I thought Dell only shipped 850w PSU with Ryzen system.  But anyway, your 460w is way better than the linked Apevia, so I suggest not to get that one.  If you can get Dell OEM GTX 1070, it should work fine with the 460w.  I think that most of Dell PSU are high quality and can last a long time.  Of course, just like every other manufacturers, some units have imperfections and would stop working prematurely.

    From what you described, something is wrong with the SSD as power would had nothing to do with its temp.  Only when you run large files transfer of a few hundred gigs, the controller area would get warm to the touch.  Modern Samsung use its stickers as heat spreader, so it can get cool down very quickly.

     

  • MBlasta

    11 Posts

    403

    0

    Posted February 16th, 2023 08:00

    Opps....Yeah I meant 100ºF ....it ain't literally smoking. And speaking of thermal, I'm an old Silicon Valley Engineer, so unlike most I have a dozen tubes of Lithium paste around here and am not afraid to use it.

    "User Bench" is telling me the Sam 970 Evo is under performing.  I checked Dev Man and it says it's a MS Driver. I pulled the driver off Sammy's site and tried to update, it still says it's MS....so I may need to force the issue. One thing I glazed over on install was the "system requirements" of Intel Hather something or another....this maybe I should figure out what it is.......

    Thanks again

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    397

    1

    Posted February 16th, 2023 11:00

    @MBlasta  - See if BIOS is set to RAID or AHCI, but don't change it.

    Samsung SSDs and software don't work well when BIOS is set to RAID. If it's set to RAID, you can change it to AHCI, but you have to do the right way:

    1. At desktop, open Cmd prompt window, Run as administrator

    2. Copy/paste this command, which will start Windows in Safe Mode the next time you reboot: bcdedit /set {current} safeboot minimal and press Enter

    3. Restart the computer and tap F2 to enter BIOS setup

    4. Change the SATA Operation from RAID to AHCI

    5. Save the change and exit Setup and Windows will automatically boot in Safe Mode

    6. Open Cmd again, as in step #1

    7. Copy-paste this command, which will start Windows in Normal Mode the next time you reboot: bcdedit /deletevalue {current} safeboot and press Enter

    8. Reboot and Windows will automatically start with AHCI drivers enabled

    Check for Samsung driver installation and SSD performance again...

    And glad it's only 100ºF !

  • MBlasta

    11 Posts

    392

    0

    Posted February 16th, 2023 13:00

    Thanks RoHe

    My SATA Operation is already set to AHCI. I'm thinking my issue is the driver. In Dev Man/ Storage Controllers/ Standard NVM Express Controller ... I have a MS Driver Circa 2006. That driver is at Winsows } System 32 } drivers / stornvme.sys.  I spent some time with Samsung CS and newer driver I downloaded is secnvme.sys and is in the same directory, but windows is resisting all attempts to change it. Direct pointing to it will only accept *.inf, even though Dev Man list the 2006 MS driver as a .sys. Do I need to run Dev Man as an Admin????

    Thanks so much for all your help

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    193

    1

    Posted February 16th, 2023 15:00

    You can't manually install a .sys. 

    You should be downloading the Win 10 .exe driver installer from Samsung for driver v3.3, for their 970 PRO, 970 EVO, 970 EVO Plus, 960 PRO, 960 EVO and 950 PRO SSDs.

    Driver installation instructions are here. It won't hurt to use "Run as administrator" when running this .exe installer but I don't think it matters...