UNSOLVED

EEretired

updated

8 years ago

E

EEretired

1 Rookie

•

5 Posts

0

5946

October 9th, 2018 07:00

Inspiron 3670, no standoff for M.2 SSD

Space ScrewSpace ScrewThis is what came with my 3670 in the position where a standoff should have been to support a m.2 ssd.

This is all one piece. What is the purpose of a phillips screw with an incredibly tall head?

Looks like dell outsourced the manufacture of the required standoff / screw and they saved 2 cents by making it all one unit and neither QA or QC caught the mistake and put it into production. How embarrassing. 

I see there is a similar posting marked as solved but the "solution" is an Amazon standoff / screw but the user tossed the standoff, indicating that his PC came with a standoff installed, so we don't know if the suggested standoff threads or height is correct..

dell tech support states that there is no standoff available and if the 3670 does not come with a m.2 ssd, one cannot be added.

Please tell me I'm wrong or give me the thread and height of the required standoff, or a link to one known to be correct.

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4895

    0

    Posted October 9th, 2018 16:00

    Also for more information read the following thread. As stated a user has 3 3670 systems and installed M.2 drives with no issues.

    https://www.dell.com/community/Inspiron-Desktops/Inspiron-3670-are-any-M-2-NVME-SSD-s-compatible/td-p/6128857/page/2

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4900

    0

    Posted October 9th, 2018 16:00

    According to the service manual for the 3670, the procedure for removing and replacing the M.2 drive is listed. I have to assume that would mean the 3670 supports an M.2 drive. Also listed in the drivers is a firmware update for the M.2 NVME drive.  Here is a link from Amazon for the standoff and screw.

    https://www.amazon.com/GutsParker-M-2-Standoff-Screw-Drives/dp/B06XBG1783#customerReviews

    or from Intel...

    Standoff

    https://click.intel.com/m-2-standoff-2x-screws-per-order.html

    Screw..

    https://click.intel.com/m-2-screw.html

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • azak

    1 Rookie

    •

    18 Posts

    4887

    0

    Posted October 9th, 2018 17:00

    The thread on top is not easily visible but this standoff does take an M2X3 screw.

  • EEretired

    1 Rookie

    •

    5 Posts

    4877

    0

    Posted October 10th, 2018 04:00

    Bought the Guts Parker. They don't give a male thread size but it's way too small. Need a 6-32 thread. Hopefully someone can delete the several references to it.

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4871

    0

    Posted October 10th, 2018 05:00

    Very strange as 6/32 is the thread size for a motherboard standoff not an NVME M.2 standoff. Quite a difference and I have never seen an M.2 standoff with threads that big. Usually they are M2. If you need a standoff with a thread that size, any computer shop should be able to supply you with that. Though the screw portion of that standoff might be too long. As I stated that is the normal size for a desktop motherboard standoff..

    Take a look at the picture in the following thread to see what I mean.

    https://linustechtips.com/main/topic/520681-m2-stand-off-and-screw-asus-z170/

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4856

    0

    Posted October 10th, 2018 06:00

    Just took a look at the service manual for your Inspiron 3670. They specify the hold down screw as M2x3.5. Which leads me to believe that the usual standoff is M2. Now I am wondering if the screw size for your motherboard was a  proprietary standoff. ..sounds strange but anything is possible. Take a look at the service manual for your system and look at the picture of the standoff compared to the usual stand off picture in the previous post.

     

    https://www.dell.com/support/manuals/ca/en/cadhs1/inspiron-15-3537/inspiron_3670_servicemanual/procedure?guid=guid-17bdb65c-a00a-4d31-9e17-e6c94c017089&lang=en-us

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • EEretired

    1 Rookie

    •

    5 Posts

    4848

    0

    Posted October 10th, 2018 07:00

    Thanks azak, the Phillips slot is so deep, I can't see threads down in there. Will give it a try.

  • EEretired

    1 Rookie

    •

    5 Posts

    4850

    0

    Posted October 10th, 2018 07:00

    Looks like I need a standoff with 6-32 male threads, M2 female threads (M.2 standard?) and a standoff rise above the mb of about 1/4"

  • EEretired

    1 Rookie

    •

    5 Posts

    4820

    0

    Posted October 11th, 2018 14:00

    Thanks again, that solves my problem. It would be nice to come up with a part number or specs for the next person looking for this standoff, considering the bad info in related threads, or maybe the standoff is different for different revs of the 3670?

  • blazer57

    1 Message

    1417

    1

    Posted October 28th, 2018 10:00

    The screw that came on the board is threaded in the center for a 2x3.5 screw. You have to look really close to see it as it looks like it"s just a phillips head with a extended top. This is your standoff. I found a 2x3.5 screw at a hobby store, works great.