UNSOLVED

bgordon8684

updated

6 years ago

0

2129

January 14th, 2021 15:00

Dual displays not detected on new Inspiron 3880

Using Windows 10 with 2 monitors connected (VGA and HDMI).  If both are connected, it only detects the VGA.  If I unplug the VGA, leave the HDMI plugged in and restart, it detects the HDMI one, but plugging in the VGA again (in addition) and it won't detect it.  Can't seem to get it to detect both monitors no matter what I do.

Reset BIOS to factory settings -- no difference.  Must be something in Windows or in the hardware (?).

(I restored an image to this computer from another older computer replaced by this one using Acronis True Image.  Don't know if that is causing the problem...)

Anyone have any suggestions?

Thanks.  -bg

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1893

    0

    Posted January 14th, 2021 17:00

    1. You shouldn't be "hot plugging" monitors into VGA ports.

    2. The image from old PC isn't very likely to work properly on this new PC with it's 10th Gen CPU.

    3. Do you have an add-in video card or only onboard Intel Graphics?
      If you have add-in video card, both monitors can be connected there.

    4. Did you enable the Multi-Display option in BIOS setup?
  • 1888

    0

    Posted January 14th, 2021 19:00

    Thanks, Ron.

    I couldn't find a Multi-Display option in the BIOS setup.  If there is one, that's probably the problem...

    Will put a video card in if all else fails, but the onboard video stuff was working before I restored this image to the computer, I think.  All looks perfect in the device manager after I installed a couple of drivers from the dell support site.  -bg

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1870

    0

    Posted January 15th, 2021 12:00

    See Table 5 in the Inspiron 3880 Service Manual.  But the multi-display setting is typically only needed when you're trying to use both an add-in video card and an onboard video port.

    Like I said, the image from some old PC probably isn't going to work right on a new PC with a 10th Gen CPU. Did you install the Intel chipset, Intel management engine and Intel UHD Graphics drivers for the Inspiron 3880?

  • 1862

    0

    Posted January 15th, 2021 19:00

    Thanks for the info on Table 5.

    I'm with you on the old PC image thing.  I installed a video card and got it working with 2 monitors, but there is squirreliness with the sound card and probably some other things I haven't discovered yet.  I'm going back to the original setup and will work from there.

    Thanks again...  -bg

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1845

    0

    Posted January 16th, 2021 12:00

    @bgordon8684  Why did you attempt to use an image from an old PC?  No offense, but were you just being lazy and didn't want to install your apps on the new PC? 

    If you didn't make an image of the factory system on an external drive with software like Acronis or Macrium Reflect, etc, you're probably not going to be able to do a "factory reset" because the image from the old PC over-wrote the recovery files on the internal drive. So you may end up having to do a clean install of Win 10...