UNSOLVED

rsankuru

updated

10 years ago

R

rsankuru

14 Posts

0

55368

March 28th, 2016 07:00

Lost blocks detected in a RAIDset

Hello All,

I am observed that one of the member showing warning alert - Lost blocks detected in a RAIDset.

i am seeing this warning after one of the drive is failed in member. we have two spare disks in each member. currently all drives are healthy. but still why its showing warning error. 

Please let us how to resolve the issue. 

Thanks,

Raviteja

  • rsankuru

    14 Posts

    5039

    0

    Posted March 28th, 2016 08:00

    No. sorry to say that may 2015 support is ended. management is not looking to extend warranty of this box.

    This member capacity is 12TB which mapped to only one server.  Please help us how to fix this..

  • rsankuru

    14 Posts

    5039

    0

    Posted March 28th, 2016 09:00

    Can i perform the below steps ? some one plz guide me..

    DellEQL> su exec 'raidtool'

    You are running a support command, which is normally restricted to PS Series Tec

    hnical Support personnel. Do not use a support command without instruction from

    Technical Support.

    Driver Status: Ok

    RAID LUN 0 Ok.

     14 Drives (0,2,47,6,8,1,3,5,7,9,10,11,12,13)

     RAID 50 (64KB sectPerSU)

     Capacity 7,165,476,077,568 bytes

    RAID LUN 1 Ok.

     14 Drives (14,15,16,17,18,19,20,21,22,23,24,25,26,27)

     RAID 50 (64KB sectPerSU)

     Capacity 7,165,476,077,568 bytes

    RAID LUN 2 Ok.

     *!! RAID LUN contains 62 lost blocks. !!*

         (raidtool -W 2) clears blocks.

         (raidtool -w 2) lists blocks.

     14 Drives (28,29,30,45,32,33,34,35,36,37,38,39,40,41)

     RAID 50 (64KB sectPerSU)

     Capacity 7,165,476,077,568 bytes

    RAID LUN 3 Ok.

     04 Drives (42,43,44,46)

     RAID 5 (64KB sectPerSU)

     Capacity 1,791,369,019,392 bytes

    Available Drives List: 4,31

    DellEQL>

    http://virtual-grind.com/2012/02/21/clearing-equallogic-lost-raid-blocks/

  • rsankuru

    14 Posts

    5058

    0

    Posted March 28th, 2016 09:00

    all right. let me check with Dell support. thanks for suggestions.

  • rsankuru

    14 Posts

    5058

    0

    Posted March 28th, 2016 10:00

    Current firmware version.

    Storage Array Firmware - V5.2.4 (R255063)

  • Schwachb

    3 Posts

    1609

    0

    Posted February 1st, 2017 01:00

    I had the same problem. What is the correct Procedure for Firmware 5.2.10? Is a reboot also needed?

    kind regards

  • Schwachb

    3 Posts

    1609

    0

    Posted February 1st, 2017 23:00

    Hi,

    So far I've done the following:

    The problem occured after swapping a defective harddrive and the Raid was rebuilding.

    I've identified all Volumes that were affected by the lost blocks, moved the data, deleted the affected volumes and the corresponding snapshots. After that I rechecked that all volumes are working correctly.

    then i logged on to the EQL, ran raidtool and discarded the lost blocks.

  • Schwachb

    3 Posts

    1609

    0

    Posted February 1st, 2017 23:00

    Hi, thanks for the fast reply

    just for clarification: After running raidtool and clearing all lost blocks with the mentioned firmware I'm done. there is no script I need to run - and also no reboot is needed.