UNSOLVED

btenhoeve

updated

7 years ago

B

btenhoeve

1 Rookie

•

13 Posts

0

3355

June 4th, 2019 02:00

How to change the spare disk on EqualLogic

Hello,

Is there a possibility to change the spare disk in an EqualLogic?

Kind regards,

Bjorn

  • dwilliam62

    6 Operator

    •

    1516 Posts

    •

    6374 Points

    2915

    0

    Posted June 4th, 2019 03:00

    Hello Bjorn,

     When you say "change the spare" I am presuming you mean add it into the RAIDset for additional space?

      Please let me know what RAID level you are currently using and what firmware and model the EQL array is.

      Running without spares is allows on selected RAID levels. 

      Generally speaking it is not a good idea to run RAID without spares.  I would strongly suggest you have several cold spares available.  One problem with cold spares is they are not periodically tested.

      Regards,

    Don

     

  • btenhoeve

    1 Rookie

    •

    13 Posts

    2902

    0

    Posted June 4th, 2019 05:00

    I want to change 2 disks from active to spare. It is something like this: Disk 1 (spare) to Active. Disk 5 (Active) to Spare. Firmware is 7.1.2 (we're working on that to update it) I want to do it on an PS5000 but we also have 6000 and 6100 Regards, Bjorn
  • dwilliam62

    6 Operator

    •

    1516 Posts

    •

    6374 Points

    2899

    0

    Posted June 4th, 2019 06:00

    Hello Bjorn,

     Sorry, if the RAID policy has been set to "no spares" there is no way to revert back to a spares consideration without first resetting the array.  There is no way to maintain the data and configuration.  Once the spares are added there's no reversing it.

      If you had an array that was large enough to hold the data that you  could add to that group then you could evacuate the member out of the group the add it back in using the spares based RAID policy. 

     Regards,

    Don