UNSOLVED

joekro

updated

18 years ago

J

joekro

9 Posts

0

45708

June 2nd, 2008 18:00

AX100 Flare OS download

We have an Dell AX100 with very very 0ld Flare OS. Tryng to register to download software at www.emc.com/dell-ax100support site. It will not take my SN# which is APM00043202837. I confirmed this SN# With the Storage System Serial Number in Navisphere express. Any Ideas. Thanks.
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1052

    0

    Posted June 2nd, 2008 19:00

    You may need to call Dell support and see if they can assist with getting you access to the downloads.
  • joekro

    9 Posts

    1052

    0

    Posted June 3rd, 2008 14:00

    I called support and they downloaded 'AX100_Series-Bundle-02.19.100.5.048.zip' for me.  We are using currently using flare 2.08.100.5.011.  I forgot to ask the tech if there was any other software I needed to update like Navishere or powerpath. Any Idea?

     

    Thanks Much.

     

     

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1052

    0

    Posted June 3rd, 2008 14:00

    What OSes are you using on the servers that are connected to the AX100?
  • joekro

    9 Posts

    1052

    0

    Posted June 3rd, 2008 17:00

    Connected to a single windows 2000 SP4 server at the moment. The ax100 is populated with 12 250GB drives and is full (hoping not to blow anything, restoring would not be fun.)

     

     

     

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1052

    0

    Posted June 3rd, 2008 19:00

    I forgot to ask which fibre channel card(s) you have, and if you're connecting through a switch (if so, which model and what's the current firmware).
  • joekro

    9 Posts

    1052

    0

    Posted June 3rd, 2008 20:00

    No switch. Direct connect with 2 Qlogic QLA200 FC2 cards.
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1052

    0

    Posted June 4th, 2008 14:00

    For:
    - AX100
    - Windows 2000 SP4
    - QLA200

    The latest versions on the EMC support matrix are:
    - Qlogic driver 9.1.4.10
    - QLA200 bios 1.23
    - Powerpath 4.5.2 or 5.1

    If upgrading from a Powerpath version below 4.6 to 4.6 or higher, safest is to first back up your license key if one is installed (license tool via the start menu, or from a dos prompt you can do a "powermt check_registration"), then uninstall Powerpath, reboot and install the new Powerpath. During the install of Powerpath 4.4 and higher it asks if you're installing this on a server that will only connect to an AX-series system. If you say yes, it will not ask/need a license. If you later decide to connect this server to a CX-system (in combination with connecting to the AX or only to the CX), you may need to uninstall Powerpath and reinstall again to put in a license.

    The version numbers can be gotten from the EMC support matrices here.
  • Dell-Jeff G

    156 Posts

    1052

    0

    Posted June 4th, 2008 18:00


    @Dev Mgr wrote:
    During the install of Powerpath 4.4 and higher it asks if you're installing this on a server that will only connect to an AX-series system. If you say yes, it will not ask/need a license. If you later decide to connect this server to a CX-system (in combination with connecting to the AX or only to the CX), you may need to uninstall Powerpath and reinstall again to put in a license.

    If you ever need to add a license key to PowerPath, simpliy go to Start -> Programs -> EMC -> PowerPath Licensing Tool.  You can add or remove a license key with this tool.  It is also a easy way to copy and paste the license key into an email, notepad or Word for future reference.