While SNMP v3 is supported for alerts and monitoring, but is not supported for discovery. What you could do is configure it to SNMP v2 for discovery, then change to SNMP v3 for monitoring.
Let me know if this helps.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
@DELL-Marco B would it be this section? 'Manage incoming alerts' which is on page 74? as the other sees to be related to forwarding, as I use another system for monitring devices, that is what is using the SNMP currently, would it be a case if passing through the traffic through OME?
@DELL-Marco B is this something that can/will be implemented at one point? as the storage series we have doesnt support all versions of snmp to function simultaneously
Ok, just to clear stuff up. You can discover with SNMP v1 or 2, but SNMP v3 is only supported for monitoring. Now as far as changing the SNMP level after discovery, you would just need to copy/paste their range/devices out of one into another.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
0
0
Posted May 27th, 2025 14:12
Timetravellingelf,
While SNMP v3 is supported for alerts and monitoring, but is not supported for discovery. What you could do is configure it to SNMP v2 for discovery, then change to SNMP v3 for monitoring.
Let me know if this helps.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!