that should be visible. At least in the GUI it is. Not sure how and where in an spcollect this shows up, but I can imagine it's there. I'll try to look it up when I get back to the office next week.
Each time when a Lun is concatenated, a new component will be created. Concatenation and striping can be performed multiple times on a Lun. There is a limit for Luns per MetaLun component and Components per MetaLun. They differ from array model. Above screen shot is taken from SP collects. Using Layout column we can identify striped Luns on each component
Is it correctly understood,from the example below, that if the id fiels only contains one entry, it is a striped metalun, and that if the id field contains more entries, it is a concatenated Meta??
Just want to make sure I understand the output. In your example, all LUNs (with the exception of LUNs 0, 22 and 66) are concatenated metaLUNs. Is that correct?
GearoidG
251 Posts
1676
1
Posted June 19th, 2013 04:00
See the previous post I did about USM which should guide you
https://community.emc.com/people/GearoidG/blog/2013/04/04/other-useful-features-of-usm