Vajinap

updated

18 years ago

V

Vajinap

47 Posts

0

1322

September 14th, 2008 17:00

info regarding flare upgrade for using mirro view

We are planning to implement mirror view in our environment. Can any one suggest me the best practice that we need to have the flare versions between the primary and secondary mirror.
  • DGM3

    238 Posts

    909

    0

    Posted September 14th, 2008 19:00

    You may wish to review the Release Notes for MirrorView, on Powerlink at;
    Home > Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > MirrorView > Release Notes

    The "Interoperability" segment near the front to the Release Notes should be helpful.

    It may also help if you could provide some additional context about your intended configuration, such as which type of mirroring (Sync or Async), and what array models would be deployed.

    Regards,
    DGM
  • RRR

    6 Operator

    •

    5739 Posts

    909

    0

    Posted September 15th, 2008 01:00

    It's best to have the Flare's not further appart then 1, so Flare 24 and 26 is ok, 19 and 22 is ok, 26 and 28 is ok.
    Other configs work, but EMC recommends to keep them close.
  • rgunda

    40 Posts

    909

    1

    Posted September 15th, 2008 06:00

    Thank You
  • rgunda

    40 Posts

    909

    0

    Posted September 15th, 2008 06:00

    Thank U RRR
  • rgunda

    40 Posts

    909

    1

    Posted September 15th, 2008 06:00

    Thank You very much and the thing is we are planning to do some migrations using mirror view from cx500/700 to cx3-80. what method you would suggest? (mirror view/A or mirror view/S)
  • RRR

    6 Operator

    •

    5739 Posts

    909

    0

    Posted September 16th, 2008 03:00

    :)